Pressure drop profile calculation

AI Thread Summary
Calculating the pressure drop profile for Arabian medium crude oil requires specific details, including the flow rate and fluid properties. The discussion highlights the need for clarity on what is meant by "pressure drop profile." Participants emphasize that the problem is complex and cannot be solved without adequate information about the piping system. The right equation for pressure drop calculations depends on these variables. Accurate calculations are essential for effective fluid transport in pipelines.
abdualziz
Messages
2
Reaction score
0
I am so tired I tried many times to calculate the pressure drop profile.

What is the right equation?

Please help me
 
Engineering news on Phys.org
You are so tired, you did not include enough details. Pressure drop profile of what?
 
Sorry

Pressure drop profile of Arabian medium crude oil

I need to know what Do I have to get to calculate it? & the equation I should follow it?

If U need any details, I'm here
 
What do you mean by pressure drop profile. I think that is what we aren't getting.
 
Sounds like a very complicated problem that requires knowing the flow rate and properties of the fluid and specific details about the piping.
 

Thread 'Race car suspension Class'

Posted June 2024 - 15 years after starting this class. I have learned a whole lot. To get to the short course on making your stock car, late model, hobby stock E-mod handle, look at the index below. Read all posts on Roll Center, Jacking effect and Why does car drive straight to the wall when I gas it? Also read You really have two race cars. This will cover 90% of problems you have. Simply put, the car pushes going in and is loose coming out. You do not have enuff downforce on the right...
View full post »
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
View full post »

Thread 'Cantilever help'

I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly
View full post »

Similar threads

When air pressure drops in a pipe due to friction losses, how do you calculate the associated temperature drop?
Replies
8
Views
1K
Advice on pressure drop calculation
Replies
2
Views
1K
How to determine the pressure drop in pipe diameter sizing
Replies
5
Views
2K
Calculating enthalpies of gas mixtures
Replies
3
Views
1K
Calculate Pipeline Length: Pressure Drop & Parameters Explained
Replies
4
Views
2K
Tubing Pressure drops with Compressible Fluids
Replies
3
Views
1K
How Do You Calculate Static Pressure Drop in a Laminar Flow Channel?
Replies
3
Views
2K
Scaling pressure drop to other temperatures
Replies
3
Views
2K
Pressure drop due to holes in a pipeline?
Replies
10
Views
5K
How to calculate water pressure drop in cooling tower piping system?
Replies
1
Views
3K

Hot Threads

Recent Insights

Back
Top