Q) What is the final temperature of the compressed air in degrees Celsius?

AI Thread Summary
The discussion revolves around calculating the final temperature of compressed air in a Jaguar XK8 convertible's engine cylinder. The initial conditions include a volume of 493 cm³, atmospheric pressure, and a temperature of 27°C. After compression to 47 cm³ and a gauge pressure of 2.80 x 10^6 Pa, the user attempts to apply the ideal gas law but arrives at an incorrect final temperature of approximately 520°C. The user expresses frustration over the incorrect answer and seeks clarification on potential errors in their calculations, including the definition of gauge pressure. The conversation highlights the complexities of thermodynamic calculations in automotive applications.
Azareus
Messages
2
Reaction score
0
1.A Jaguar XK8 convertible has an eight-cylinder engine. At the beginning of its compression stroke, one of the cylinders contains 493cm^3 of air at atmospheric pressure (1.01*10^5 Pa) and a temperature of 27.0 degress celcius . At the end of the stroke, the air has been compressed to a volume of 47.0cm^3 and the gauge pressure has increased to 2.80*10^6 Pa .

Q)Compute the final temperature in degrees celcius


When I do this problem I change celcius to kelvins and set up the equation in the form T2=P2*V2*T1/(P1*T2) and get and answer of 792.8825337 which i then convert back into celcius for a total of 519.8825337 degrees celcius. I have tried that number 520 to no avail. I have no hints from mp, I am just told that I am wrong. Maybe I just need to sleep on it, but any help as to what my error is would be greatly appreciated.
 
Physics news on Phys.org
What's the definition of gauge pressure?
 
... le sigh. Thanks.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top