Rate of Change of electric field

AI Thread Summary
To determine the rate of change of the electric field between the plates of a parallel-plate capacitor with a 3.8 A current, the relationship between electric field (E), potential difference (V), and capacitance (C) is crucial. The potential difference can be expressed as V = E*d, leading to E = Q/(C*d) when relating charge (Q) to capacitance. By differentiating with respect to time, the equation dE/dt = (1/(C*d)) * dQ/dt can be established, where dQ/dt is equal to the current (3.8 A). Substituting the capacitance formula for parallel plates, C = (ε₀*A/d), allows for the calculation of dE/dt using the area of the plates. This approach clarifies the relationship between current and the changing electric field, emphasizing the importance of calculus in deriving the equations.
sdoyle1
Messages
22
Reaction score
0

Homework Statement


At a given instant, a 3.8 A current flows in the wires connected to a parallel-plate capacitor. What is the rate at which the electric field is changing between the plates if the square plates are 1.76 cm on a side?

Homework Equations


The Attempt at a Solution


I don't really know where to start...
Could you use the change in length=perm of free space(I +E(sub o)*Change in E) ? I don't know if this is even an equation..
 
Last edited:
Physics news on Phys.org
For a parallel-plate capacitor, you can write the potential difference across the plates as

V = E*d

with as the potential difference, E as the electric field, and d as the separation distance. You can rearrange for E

E = V/d

If you look at V, we can relate it to the capacitance, C, by the definition C = Q/V. This becomes V = Q/C

E = Q/(Cd)

If we take the rate of chance of the left hand side and right hand side with respect to time,

dE/dt = 1/(Cd)*dQ/dt, but dQ/dt = I = the 3.8A you were given.

We can then replace C with the expression you attempted, C = (\epsilono)*(A/d) (this only holds for parallel plates!), cancel d, and we're left with an equation for dE/dt (rate of change for the electric field) with constants and your given quantities, I and the area, A.
 
makes so much sense with calculus.. our prof doesn't want us using calc b/c its not advanced 1st year physics.. I didn't think about deriving the equation, just assumed there was one already set.. thanks so much!
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top