Simple Harmonic Motion displacement

AI Thread Summary
The discussion revolves around determining the displacement from equilibrium where the speed of a mass on a spring in simple harmonic motion is half of its maximum value. The initial calculations led to a displacement of (\sqrt{3}/2)A, but the expected answer is 1/2A. Participants debated the application of energy conservation principles, with some arguing that the equations used were misapplied. The consensus is that the correct approach should involve the total energy of the system, which remains constant in simple harmonic motion. Ultimately, the participants expressed confusion over the provided solution and its assumptions about the relationship between displacement and velocity.
VincentweZu
Messages
13
Reaction score
0

Homework Statement



A mass m is attached to a horizontal spring of spring constant k. The spring oscillates in simple harmonic motion with amplitude A. Answer the following in terms of A.

At what displacement from equilibrium is the speed half of the maximum value?

Homework Equations



PE1 + KE1 = PE2 + KE2

The Attempt at a Solution



\frac{1}{2}kA2 = \frac{1}{2}mvmax2
kA2 = mvmax2
kA2/m = vmax2

\frac{1}{2}kA2 = \frac{1}{2}mv2 + \frac{1}{2}kΔx2 let v = vmax/2

kA2 = m(vmax/2)2 + kΔx2
kA2 = m(vmax2)/4 + kΔx2
kA2 = m(kA2/m)/4 + kΔx2
kA2 = kA2/4 + kΔx2
A2 = A2/4 + Δx2
(3/4)A2 = Δx2
Δx = (\sqrt{3}/2)A

the answer that I arrived at was (\sqrt{3}/2)A, however the answer is 1/2. If I subbed in arbitrary numbers for A, m, and k and let Δx = (\sqrt{3}/2)A then the velocity that results is half the max velocity.

I would like someone to confirm my answer or find something wrong with it so that I know which is the right answer. Thanks.
 
Physics news on Phys.org
VincentweZu said:

Homework Statement



A mass m is attached to a horizontal spring of spring constant k. The spring oscillates in simple harmonic motion with amplitude A. Answer the following in terms of A.

At what displacement from equilibrium is the speed half of the maximum value?

Homework Equations



PE1 + KE1 = PE2 + KE2


The Attempt at a Solution



\frac{1}{2}kA2 = \frac{1}{2}mvmax2
kA2 = mvmax2
kA2/m = vmax2

\frac{1}{2}kA2 = \frac{1}{2}mv2 + \frac{1}{2}kΔx2 let v = vmax/2

kA2 = m(vmax/2)2 + kΔx2
kA2 = m(vmax2)/4 + kΔx2
kA2 = m(kA2/m)/4 + kΔx2
kA2 = kA2/4 + kΔx2
A2 = A2/4 + Δx2
(3/4)A2 = Δx2
Δx = (\sqrt{3}/2)A

the answer that I arrived at was (\sqrt{3}/2)A, however the answer is 1/2. If I subbed in arbitrary numbers for A, m, and k and let Δx = (\sqrt{3}/2)A then the velocity that results is half the max velocity.

I would like someone to confirm my answer or find something wrong with it so that I know which is the right answer. Thanks.


I think the difficulty arises when you say \frac{1}{2}kA2 = \frac{1}{2}mvmax2

certainly those two quantities are equal in size, but at no time during the oscillation do both conditions occur at the same time, so a calculation based on them may not work.
 
Thank you for your response!

Definitely there is no instant during oscillation where both these conditions occur, however, the equation which I have used - the conservation of energy, does not require that they do occur at the same time. In fact, all the law of conservation of energy states is that the total energy in one state is the same as the total energy in another so long as the system is a closed system.

In any case, the solution to this answer provided in the text doesn't convince me that at a displacement of (1/2)A would yield a velocity which is half the maximum velocity.

Basically the solution in the text involved only one equation which was:

\frac{1}{2}kA^{2} = \frac{1}{2}mvmax2

They solve for vmax giving

vmax = A\sqrt{\frac{k}{m}}

vmax \alpha A

Being directly proportional (1/2)A would lead to (1/2)vmax

I am not convinced by this solution as instead of finding at which state in the oscillation the velocity would be half its maximum, the solution says that an amplitude of half the current amplitude would half the maximum velocity.
 
VincentweZu said:
I am not convinced by this solution as instead of finding at which state in the oscillation the velocity would be half its maximum, the solution says that an amplitude of half the current amplitude would half the maximum velocity.

You're right. It looks like they either misinterpreted their own question or failed to clearly state their intention.
 
VincentweZu said:

Homework Statement



A mass m is attached to a horizontal spring of spring constant k. The spring oscillates in simple harmonic motion with amplitude A. Answer the following in terms of A.

At what displacement from equilibrium is the speed half of the maximum value?

Homework Equations



PE1 + KE1 = PE2 + KE2


The Attempt at a Solution



\frac{1}{2}kA2 = \frac{1}{2}mvmax2
kA2 = mvmax2
kA2/m = vmax2

\frac{1}{2}kA2 = \frac{1}{2}mv2 + \frac{1}{2}kΔx2 let v = vmax/2

kA2 = m(vmax/2)2 + kΔx2
kA2 = m(vmax2)/4 + kΔx2
kA2 = m(kA2/m)/4 + kΔx2
kA2 = kA2/4 + kΔx2
A2 = A2/4 + Δx2
(3/4)A2 = Δx2
Δx = (\sqrt{3}/2)A

the answer that I arrived at was (\sqrt{3}/2)A, however the answer is 1/2. If I subbed in arbitrary numbers for A, m, and k and let Δx = (\sqrt{3}/2)A then the velocity that results is half the max velocity.

I would like someone to confirm my answer or find something wrong with it so that I know which is the right answer. Thanks.

ur equation 1/2k A^2=1/2mv^2+... is wrong.
it should be 1/2k(Δx)^2= 1/2mv^2
 
altamashghazi said:
ur equation 1/2k A^2=1/2mv^2+... is wrong.
it should be 1/2k(Δx)^2= 1/2mv^2

Although using \frac{1}{2}k(Δx)2= \frac{1}{2}mv2 would get (1/2)A. I disagree that doing this is correct.

In SHM the total energy of the system is \frac{1}{2}kA2 and the law of conservation of energy states that this is a constant. Therefore at any instant of the motion the sum of the kinetic energy and the elastic potential energy should equal this constant.

Therefore using \frac{1}{2}k(Δx)2= \frac{1}{2}mv2 would be correct when looking at a spring system not in SHM, it doesn't make sense to use it in a system that is in SHM.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top