Sum of the friction and normal forces mechanics problem

AI Thread Summary
The discussion revolves around solving a mechanics problem involving a wedge on a frictionless surface with a block on its slope. The key focus is on determining the maximum and minimum values of the horizontal force F required to keep the block at rest, considering the static friction coefficient μe. Participants clarify that both the normal force and the applied force F contribute to the block's motion due to their horizontal components. The equations derived include the relationship between the forces acting on the block and the wedge, leading to an expression for F in terms of mass m, gravitational acceleration g, and the angle of the wedge. Understanding the roles of these forces is essential for solving the problem accurately.
luiseduardo
Messages
29
Reaction score
0
Hi,

Can anyone explains me how to solve this problem ? I'm very confused what to do.

Homework Statement




"A wedge of mass M subjected to a horizontal force is on a frictionless horizontal surface. Place a block of mass "m" on the sloping surface of the wedge. If the coefficient of static friction between the surfaces of the wedge and the block is "μe", find the maximum and minimum values of force F so that the block remains at rest on the wedge."

[PLAIN]http://img411.imageshack.us/img411/4226/calso.jpg


Homework Equations



Fr = M.a

The Attempt at a Solution



Well, I tried to do, but I have two questions:

What is the force applied to the block that will make it up? It would be a Normal or force F?
 
Last edited by a moderator:
Physics news on Phys.org


Yes, it is the sum of the friction and normal forces that contribute to the motion.
 


Ok, but the force F will contribute to the motion too ?
Or the force F don't acts to the motion only the Normal, is it?
 


Both of them will contribute since they both have horizontal components and the motion is horizontal...
 


Thanks, another question: We need two Normal ?

N (down) = mgcos a - F*sen a
N (up) = F*sen a + mgcos a
 


I found:

[mg(cos a*μe - sen a)] / (sen a*μe + cos a) =< F

F =< [mg(sen a + cos a*μe)] / (- sen a*μe + cos a)
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top