Thermal Expansion of Gas in a Tank

AI Thread Summary
An underground gasoline tank at 54°F can hold 1100 gallons, but when filled at 82°F, the gasoline cools to 54°F upon entering. The volume expansion formula, ΔV = βV₀ΔT, is used, with β for gasoline approximated as 3 times the linear coefficient of expansion, which is 9.6e-4. The calculations initially suggested an increase to 1188.7 gallons, but this was incorrect due to misunderstanding the coefficients. The discussion emphasizes the importance of correctly applying the volume expansion concept to determine how much gasoline can be poured into the tank. Accurate calculations are crucial for understanding thermal expansion in practical scenarios.
slong89
Messages
2
Reaction score
0

Homework Statement



An underground gasoline tank at 54°F can hold 1100 gallons of gasoline. If the driver of a tanker truck fills the underground tank on a day when the temperature is 82°F, how many gallons, according to his measure on the truck, can he pour in? Assume that the temperature of the gasoline cools to 54°F on entering the tank.

Homework Equations



(delta)Length = 3(alpha) * Volume(initial) * (delta)Temp
i found the value alpha for gasoline to be 9.6e-4

The Attempt at a Solution



3(9.6e-4)(28)(1100)=delta(L)=88.7
thus the amount he could pour in is 1188.7
for some reason this isn't the answer though... I'm not really sure what I'm doing wrong
 
Physics news on Phys.org
The equation for volume expansion will look like this:
\Delta V = \beta V_0 \Delta T

where \beta is the volume coefficient of expansion, which would be about 3 times the linear coefficient. Are you sure you found the linear coefficient of expansion for gasoline?
 
You're right.. thank you so much. The 9.6e-4 already accounted for the times 3, and thus was the volume coefficient of expansion. I guess you couldn't really make one for gasoline anyway. Thanks again.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top