Thermal expansion of liquid in a tube

AI Thread Summary
The discussion focuses on calculating the new height of liquid in a cylindrical glass tube due to thermal expansion. It outlines the need to consider both the volume expansion of the liquid and the area expansion of the tube. The absolute height of the liquid can be determined using the formula that incorporates the coefficients of thermal expansion for both the liquid and the tube. For the relative height of the liquid compared to the tube, a separate equation is derived that accounts for the changes in both volume and area. The final height equations are confirmed to be correct, emphasizing the importance of understanding the relationships between volume, area, and height in thermal expansion scenarios.
Soren4
Messages
127
Reaction score
2

Homework Statement


A cylindrical glass tube (linear thermal expansion coefficient ##\alpha##) contains liquid (volume thermal expansion coefficient ##\beta##). The height of the tube is ##h_{t,0}## and the height of the liquid inside of it is ##h_{l,0}##. If the temperature changes of an amount ##\Delta T## what is the new height of the liquid? If the cylindrical tube is provided of a measuring scale, what is the new height of liquid measured from the scale? Do not neglet any thermal expansion.

Homework Equations


Thermal expansion coefficients

The Attempt at a Solution


I get a bit confuse in considering all the expansions. The relation I would use is $$\frac{\Delta V}{V}\approx\frac{\Delta h}{h} +\frac{\Delta A}{A}$$
  • To find the new "absolute" height of the liquid I would simply consider the change in volume ##\Delta V_{l}=V_{l,0} \beta \Delta T##, and then the change in the area of the cylinder ##\Delta A_{t}=A_{t,0} 2 \alpha \Delta T##. Then I would write
$$\frac{\Delta h_{l}}{h_{l,0}} =\frac{\Delta V_{l}}{V_{l,0}}+ \frac{\Delta A_{t}}{A_{t,0}}=(\beta-2\alpha) \Delta T$$
So actually in this case I did not consider the change in height of the tube, since, what is asked is simply the (absolute) change in height of the liquid.​
  • While, to get the new height of liquid "relative to the tube" I would consider the "relative change in volume" $$\Delta V_{l,relative}=\Delta V_{l}-\Delta V_{t}=(V_{l,0} \beta- V_{t,0} 3\alpha)\Delta T$$
Here is my main doubt: does this "relative" change already takes into account the fact that the area of the tube changes and that the height of the tube changes? If so, considering this "relative change" I can write​
$$\frac{\Delta h_{l,relative}}{h_{l,0}}= \frac{\Delta V_{l,relative}}{V_{l,0}}$$
And get the new height relative to the tube, but I'm not convinced about this last equation I wrote.Are these two processes correct or are there any mistakes (conceptual or of other kind) ?
 
Physics news on Phys.org
Hey Soren4,
The absolute looks OK.

Still thinking about the relative equation.
But as a hint, you have the absolute height of the liquid.
You can determine the absolute height of the marking on the tube.
Does your equation confirm the relative change in height tube/liquid?By the way, do you have an understanding about how
say, the equation of ΔV/V that you have listed comes about

ie from assuming small changes in temperature
linear ( 1 + α )
planar ( 1 + α ) ( 1 + α )
volumetric ( 1 + α )( 1 + α )( 1 + α )
 
Soren4,
For the volumes of liquid before and after changing T we have $$V_0 = h_0A_0$$ and $$V_1=h_1A_1$$ The second equation can be rewritten as
$$(V_0+\Delta V)=(h_0+\Delta h)(A_0+\Delta A)$$
$$V_0\left ( 1+\frac{\Delta V}{V_0} \right )=h_0A_0\left ( 1+\frac{\Delta h}{h_0} \right )\left ( 1+\frac{\Delta A}{A_0} \right )$$
$$1+\frac{\Delta h}{h_0}=\frac{1+\frac{\Delta V}{V_0}}{1+\frac{\Delta A}{A_0}}=\frac{1+\beta \Delta T}{1+2 \alpha \Delta T}$$
The new height
$$h_1=\frac{1+\beta \Delta T}{1+2 \alpha \Delta T}h_0$$

You can use the same approach in the second part of your problem.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top