Thevenin Equivalent with a dependent source

AI Thread Summary
To find the Thevenin Equivalent circuit between points A and B, all resistances in that section should be combined into a single equivalent resistor, while voltage sources are reduced to one source. The presence of a dependent source requires calculating the voltage across it, which can be expressed in terms of another voltage (vx). Using techniques like Kirchhoff's Current Law (KCL) and Kirchhoff's Voltage Law (KVL) or node analysis can help determine the value of vx. Understanding these concepts is crucial for successfully simplifying the circuit. The discussion emphasizes that encountering a dependent source should not be intimidating.
RedDead
Messages
8
Reaction score
0
Find the Thevenin Equivalent circuit between A and B
the circuit is in the attachments...

i don't know how to start and don't know what it meas "Between A and B"
and i never encountered a problem with a dependent source.

Thanks...
 

Attachments

  • IMAG0012.jpg
    IMAG0012.jpg
    20.6 KB · Views: 540
Physics news on Phys.org
Thevenin circuit is a resistor and voltage source in series.

To reduce the circuit to a thevenin equivalent circuit you would replace all the resistances between a and b with one equivalent resistor and reduce the voltage sources to one source.

think of two parallel resistors being represented as one resistor it's similar to this except you have a bunch of resistors and a dependent source as well.

as for the dependent source you shouldn't panic. if you can find the voltage vx then you know the voltage across the dependent source is just 5vx.
 
anthonuc said:
Thevenin circuit is a resistor and voltage source in series.

To reduce the circuit to a thevenin equivalent circuit you would replace all the resistances between a and b with one equivalent resistor and reduce the voltage sources to one source.

think of two parallel resistors being represented as one resistor it's similar to this except you have a bunch of resistors and a dependent source as well.

as for the dependent source you shouldn't panic. if you can find the voltage vx then you know the voltage across the dependent source is just 5vx.
right, but how can i find Vx?
 
hopefully you know how to use kcl and kvl if not node analysis.
 
thanks
 
Last edited:
no problem.
 

Similar threads

Thevenin Theorum
Replies
1
Views
1K
Engineering Norton/Thevenin Equivalent circuits with a dependent voltage source
Replies
9
Views
5K
Why is the Thevenin resistance in this problem 3.2 kΩ?
Replies
17
Views
2K
Engineering How do I find Vth with the node voltage method?
Replies
10
Views
3K
Engineering Find the Thevenin equivalent circuit
Replies
42
Views
6K
Engineering Finding Thevenin Equivalent Voltage for a Circuit with Multiple Voltage Sources
Replies
12
Views
2K
Engineering Finding the Thevenin Equivalent Circuit for a Network with a Load Resistor
Replies
1
Views
2K
Equivalent resistance in a Wye formation
Replies
7
Views
2K
Engineering How to Calculate Thevenin Equivalent Circuit
Replies
5
Views
2K
Engineering Homework: Rx=? to get maximum power transfer at point M
Replies
4
Views
2K

Hot Threads

Recent Insights

Back
Top