Two fixed charges, find (x,y) coords of third particle.

  • Thread starter Thread starter kspabo
  • Start date Start date
  • Tags Tags
    Charges Particle
AI Thread Summary
To find the coordinates of the third particle where the net electrostatic force is zero, it must be positioned along the x-axis, meaning y = 0. The relationship between the forces from the two fixed charges leads to the equation k q1q3/r² = k 3q1q3/(L-r)². After simplifying, the correct relationship is established as 1/r² = 3/(L-r)², allowing for further calculations. The final expression for the position of particle 3 is derived as r = (L sqrt(3)/3)/(1 + sqrt(3)/3). This solution provides a clear method for determining the equilibrium position of the third charge.
kspabo
Messages
19
Reaction score
0

Homework Statement


In the figure particle 1 of charge q1 (at origin) and particle 2 of charge q2 = 3q1, are held at separation L on an x axis. If particle 3 of unknown charge q3 is to be located such that the net electrostatic force on it from particles 1 and 2 is zero, what must be the (a)x and (b)y coordinates of particle 3?

Homework Equations


E = k q1q2/r2

The Attempt at a Solution


We know that the third particle will be held at equilibrium between the two particles (so y = 0), so the forces on it from q1 and q2 will cancel out. From this idea we get:

E13 - E23 = 0
E13 = E23

We plug in our relevant equation:

k q1q3/r2 = k q2q3/(L-r)2

Plug in and cancel like terms:

k q1q3/r2 = k q2q3/(L-r)2
k q1q3/r2 = k 3q1q3/(L-r)2
k q1q3/r2 = k 3q1q3/(L-r)2
q1/r2 = 3q1/(L-r)2
1/r2 = 2q1/(L-r)2

Attempt to isolate for r:

(L-r)/r = sqrt(2q1)And this is where I get stuck.
 
Last edited:
Physics news on Phys.org
kspabo said:
Plug in and cancel like terms:

1/r2 = 2q1(L-r)2
You did not do this step correctly.
 
Orodruin said:
You did not do this step correctly.
I believe I just accidentally left out the division sign. Let me write it out long way just to make sure:

k q1q3/r2 = k q2q3/(L-r)2
k q1q3/r2 = k 3q1q3/(L-r)2
k q1q3/r2 = k 3q1q3/(L-r)2
q1/r2 = 3q1/(L-r)2
1/r2 = 2q1/(L-r)2
 
The last step is still not correct so you need to repeat arithmetic rules. The different sides of the last equation are even dimensionally inconsistent. The left side has dimension length^-2 while the right has dimension charge length^-2.
 
Orodruin said:
The last step is still not correct so you need to repeat arithmetic rules. The different sides of the last equation are even dimensionally inconsistent. The left side has dimension length^-2 while the right has dimension charge length^-2.
Oh wow, I see what you're talking about. I blame my long summer break for this silly arithmetic error. Ok, so I fixed my work and have arrived at:

q1/r2 = 3q1/(L-r)2
1/r2 = 3/(L-r)2
sqrt(1/3) = sqrt(r2/(L-r)2)
sqrt(1/3) = r/(L-r)
L(sqrt(1/3) + 1)= r

So after going through this I just realized my arithmetic is off again... let me figure this out.
 
Last edited:
EDIT: My work was wrong and this post was pointless. Currently working it out again.

EDIT2: I finally got the answer. I'll post my work for future people that have this same question.

sqrt(3)/3 = r/(L-r)
L sqrt(3)/3 - r sqrt(3)/3 = r
L sqrt(3)/3 = r (1+ sqrt(3)/3)
r = (L sqrt(3)/3)/(1+ sqrt(3)/3)
 
Last edited:
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top