What is the acceleration of the upper block after the string breaks?

  • Thread starter Thread starter eprparadox
  • Start date Start date
  • Tags Tags
    Spring Two masses
AI Thread Summary
The discussion revolves around determining the downward acceleration of the upper block after the string connecting two identical blocks is cut. The forces acting on the upper block include gravity and the force exerted by the spring connected to the lower block. Initially, the tension in the string counteracts the weight of both blocks, but once the string breaks, the tension disappears. The analysis suggests treating the system as having a combined mass of 2m, leading to the conclusion that the acceleration of the upper block is 2g. This approach confirms that the downward acceleration immediately after the string breaks is indeed 2g.
eprparadox
Messages
133
Reaction score
2

Homework Statement


Two identical blocks are connected by a spring. The combination is suspended, at rest, from a string attached to the ceiling, as shown in the figure above (THE FIGURE IS ATTACHED). The string breaks suddenly. Immediately after the string breaks, what is the downward acceleration of the upper block?
(A) 0
(B) g/2
(C) g
(D) Sqrt(2)*g
(E) 2g


Homework Equations


F = -kx
F = mg


The Attempt at a Solution


I'm having trouble labeling accurately the forces on the top block.

For the bottom block, when the system is at rest, there should be a downward force of F = mg and an upward force of F = kx, leaving mg - kx = 0.

Now for the top block, initially, there is an upward tension force, and a downward force of F=mg. How do I describe the force exerted by the the spring + lower block on the upper block? Could I just treat it like the spring isn't there and treat it like a mass of 2m (m for the upper block + m for the lower block) and say 2mg - T = 0. And then when the string is cut, the tension goes away and we get 2mg = m*a, so that a = 2g?

Thanks a lot ahead of time.
 

Attachments

  • Spring.png
    Spring.png
    10.9 KB · Views: 1,264
Physics news on Phys.org
eprparadox said:
Now for the top block, initially, there is an upward tension force, and a downward force of F=mg. How do I describe the force exerted by the the spring + lower block on the upper block? Could I just treat it like the spring isn't there and treat it like a mass of 2m (m for the upper block + m for the lower block) and say 2mg - T = 0. And then when the string is cut, the tension goes away and we get 2mg = m*a, so that a = 2g?

Sounds reasonable to me. :approve:

You could present a little more convincing argument by treating the spring as a spring immediately after the string is cut. Thus there are two forces acting on the top block (taking the top block in isolation): gravity (acting on the top block) and the force from the spring. Either way you'll get the same answer though.
 
Thank you very much.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top