Water Piston Engine: Learn What It Is & How It Works

AI Thread Summary
The discussion focuses on the water piston engine, which operates without traditional cylinders and generates thrust through water. Participants express a desire for more information and resources on the topic, noting difficulty in finding relevant documents online. One user suggests looking into RAM water pumps, highlighting both commercial and DIY options available. They also share a personal experience with a RAM pump, mentioning a common issue with debris in the check valves and recommending the use of a screen on the input supply line. Overall, the conversation emphasizes the need for more accessible information on water piston engines and related technologies.
Nucengable
Messages
42
Reaction score
0
Water Piston Engine...!

what do you know about water piston engine ! is there any online documents you provide me with , because I couldn't find anything online!
I know it uses no cylinders and the thrust is generated by the water somehow! I wish I can find something to read about the subject..
...
Thanks you in advance
 
Engineering news on Phys.org


Are you referring to RAM water pumps? Look it up on internet. There are both commercial and DIY versions available. I used one many years ago. The only problem I had was occasionally finding small sticks (from the supply line) in one of the check valves. Use a screen on the input supply line.
 

Thread 'Race car suspension Class'

Posted June 2024 - 15 years after starting this class. I have learned a whole lot. To get to the short course on making your stock car, late model, hobby stock E-mod handle, look at the index below. Read all posts on Roll Center, Jacking effect and Why does car drive straight to the wall when I gas it? Also read You really have two race cars. This will cover 90% of problems you have. Simply put, the car pushes going in and is loose coming out. You do not have enuff downforce on the right...
View full post »
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
View full post »

Thread 'Cantilever help'

I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly
View full post »

Similar threads

How does a 4-piston, 4 stroke internal combustion engine work?
Replies
11
Views
4K
Total force from air spring model (double acting piston)
Replies
8
Views
2K
Modeling Air Compression Cylinder
Replies
45
Views
5K
Turbocharging carbureted petrol 2 stroke engines
3
Replies
103
Views
27K
Question about water pressure in IPX6 water intrusion testing of an enlosure
Replies
7
Views
1K
Pistons have cracked and put a hole in the block
Replies
20
Views
4K
Automotive Ozone Enhanced Combustion of Water/Diesel Emulsion in CI Engines
Replies
6
Views
2K
Measuring the water volume in a small tank with a manometer
Replies
26
Views
2K
What makes a connecting rod turn a crank one way?
Replies
9
Views
3K
Automotive Decarbonizing an Engine with Water: Myth or Fact?
2
Replies
69
Views
141K

Hot Threads

Recent Insights

Back
Top