What are the steps for reducing sound intensity by 20 decibels?

AI Thread Summary
To reduce sound intensity by 20 decibels, the man must move from 3 meters to 30 meters away from the siren. The intensity level is calculated using the formula 20 = 10 log(I/I0), which indicates that a tenfold increase in distance results in a 20 dB decrease in intensity. The inverse square law applies, confirming that sound intensity diminishes with distance. The discussion highlights confusion around using logarithmic equations for sound intensity calculations. Ultimately, the correct distance for a 20 dB reduction is established as 30 meters.
ongobongo
Messages
3
Reaction score
0

Homework Statement


A man stands 3m from a siren. How far does he have to move to reduce the intensity level by 20 decibels?


Homework Equations


Intensity level = 10log(I/Io)
the inverse square law

The Attempt at a Solution


i know the answer is 30m because 10 times the distance drops the intensity by 20 dB although i don't understand how to use the equations to answer such a question, what are the steps involved
 
Physics news on Phys.org
welcome to pf!

hi ongobongo! welcome to pf! :smile:

start with 20 = 10 log(I/I0) :wink:
 
hi thanks for the hint but honestly i can't make heads or tails of the equation
 
simplify 20 = 10 log(I/I0)
 
I=10*10
√100 = 10
10*3 = 30m
 
ongobongo said:
I=10*10
√100 = 10
10*3 = 30m

yeees … i think you've got it, but i can't really tell :redface:

shouldn't your proof have an I0 in it somewhere? and some reference to logs?
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top