What Is the Angle Between the Clock Hands at 11:12 AM?

  • Thread starter Thread starter tatoo5ma
  • Start date Start date
  • Tags Tags
    Angle Confused
AI Thread Summary
At 11:12 AM, the angle between the clock hands can be calculated by first determining the movement of each hand. The minute hand moves 72 degrees in 12 minutes, while the hour hand moves 1.2 degrees during that same time. Starting from the initial position at 11:00, where the hour hand is at 11 and the minute hand is at 12, the initial angle is 30 degrees. Adding the hour hand's movement to the initial angle results in a final angle of 57.6 degrees between the two hands at 11:12 AM. This calculation clarifies the confusion regarding the positions of the clock hands.
tatoo5ma
Messages
15
Reaction score
0
okay!
so, i had an exercice that say:
it's 11:12am, what s the angle between the two switches?
the problem here that stopped me from solvin that is when its like 11:12, the first switch, is not at 11am but it s slightly after that! :confused: i am confused! :frown:
any help is apprecied
 
Physics news on Phys.org
The minute hand moves 60 times as much as the hour hand.
What angle does the hour hand move through when the minute hand moves through 12 minutes ?
 
0.2 :huh:
then what?
is the angle 35.9 degrees
 
The minute hand moves through 12 minutes.

12 min = 1/5 hour = 1/5 circle = 1/5*360 deg = 72 deg

so how far does the hour hand move ?
 
so, is it 14.4 deg, and the angle between the two hands at 11:12 is 57.6deg. am i right
 
The hour hand moves 1/60 of the minute hand's movement, which is 72°.
Therefore movement of the hour hand is 1/60*72=1.2°.

Remember that this movement of the hands starts at 11.00, when the hands already have an angle between them.

The little hand is on 11 and the big hand is on 12 :smile:

So you have to add this initial angle on to get your final answer.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top