What is the Net Force on Charges in a Line?

AI Thread Summary
The discussion revolves around calculating the net force on three charges arranged in a line. For charge Q1, the net force is correctly calculated as -132 N. However, the calculations for Q2 and Q3 contain errors; the net force on Q2 should be +17 N, but the direction of the forces was misinterpreted. For Q3, the net force should be 369 N, but the direction of the forces was also incorrectly assessed. The conversation emphasizes the importance of correctly identifying the direction of forces when calculating net forces on charges.
Kali8972
Messages
14
Reaction score
0
I'm having problems figuring this one out. Some guidance would be great! Thanks!

Particles of charge Q1 = +75 µC, Q2 = +44 µC, and Q3 = -80 µC are placed in a line (Fig. 21-46). The center one is 0.35 m from each of the others. Calculate the net force on each charge due to the other two. (Assume the positive direction is to the right.)




Net force on Q1

F1=242 N
F2=110 N

Net force = -242N + 110N = -132 N
(correct)



Net force on Q2

F1= 242 N
F2= 259 N

Net force = -242N + 259N = 17 N
(wrong, but why??)



Net force on Q3

F1= 110N
F2= 259N

Net force = 259N + 110N = 369 N
(wrong, but why??)
 

Attachments

  • 21-46alt.gif
    21-46alt.gif
    1.2 KB · Views: 699
Physics news on Phys.org
On your force on Q2, it should be +242N, not -242N, since Q1 is pushing Q2 to the right - i.e. in the positive direction. I also calculate F2 as 258 N, not 259 N.

On your force on Q3, it should be -110 N, since Q1 is pulling Q3 to the left - i.e. in the negative direction. Again, I got 258 N, not 259 N for F2.
 
thanks for your help!
 
Nooooooooooooooooooooot a problem!
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top