What is the perceived frequency of Bird B when it hears Bird A's screech?

AI Thread Summary
Bird A and Bird B are flying towards each other, with Bird A screeching at a frequency of 3200 Hz. Bird B, moving at 20 m/s, needs to calculate the frequency it perceives using the Doppler effect formula. The correct application of the formula shows that Bird B perceives a frequency of 3244.7 Hz, but initial calculations were incorrect due to sign errors in the velocities. The observer's speed should be positive when moving towards the source, while the source's speed should be negative if moving towards the observer. Understanding these sign conventions is crucial for accurate frequency perception calculations.
anotherperson
Messages
37
Reaction score
0

Homework Statement


Bird A and B are flying towards each other
Bird B at 20m/s
Bird A at 15m/s and screeches with a frequency of 3200 Hz
what does bird B perceive?


Homework Equations


the speed of sound is 343m/s

Fobserver==Fsource((vsound+vobserver)/(vsound+vsource)


The Attempt at a Solution



fobserver=3200((343+20)/(343+15))
=3244.7Hz

i check this against my solution and it appears to be wrong but I am not sure why. is it i got observer and source mixed around or maybe my signs?
 
Physics news on Phys.org
Yeah, you mixed up the signs. vobserver should be positive if the receiver is moving towards the source. vsource should be positive if the receiver is moving away from the source.

You can remember this by remembering that frequency always goes up if the receiver is moving towards the source. Hence, the numerator must get better, and the denominator must get smaller.
 
so in reference to this question is should be 20 and -15?
 
Yup.
 
thanks!
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...

Similar threads

Back
Top