What is the volume of the bubble

  • Thread starter Thread starter je55ica7
  • Start date Start date
  • Tags Tags
    Bubble Volume
AI Thread Summary
The volume of an air bubble released from a submarine at a depth of 115 m is affected by pressure changes as it rises to the surface. At this depth, the pressure is calculated to be approximately 12.4 atm, while the pressure at the surface is 1 atm. Using Boyle's Law, which states that p1v1 = p2v2, the volume of the bubble can be determined. As the bubble ascends, its volume increases due to the decrease in pressure. The final volume of the bubble when it reaches the surface can be calculated accordingly.
je55ica7
Messages
19
Reaction score
0
An air bubble has a volume of 1.50 cm3 when it is released by a submarine 115 m below the surface of a lake. What is the volume of the bubble when it reaches the surface? Assume that the temperature and the number of air molecules in the bubble remains constant during its ascent.

I'm guessing that the depth of the bubble effects the pressure (that being p1) and then the pressure at the surface is one atm? How can I calculate the pressure based on its depth?

Thanks in advance for any hints??
 
Physics news on Phys.org
Boyle's Law
 
so p1v1=p2v2? i figured out p1 to be 12.4 atm based on the 115 m depth. would p2 be 1 atm?
 
uhm remember the pressure at the bottom has an increment of row g h i think... been a while since i last did this, but just look into that ;-p
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top