Why Phone Charger Makes High Frequency Sound

AI Thread Summary
A phone charger may emit a high-frequency sound due to internal components vibrating during the conversion of AC to DC current. This sound can be exacerbated by electromagnetic interference (EMI) when the phone is plugged in, as increased electrical activity can lead to more vibrations. There is also a possibility that a faulty component within the charger is causing the noise, which could pose safety risks. Even when not charging a device, there is a small energy loss when the charger remains plugged in. If the noise intensifies, it is advisable to have the charger inspected for safety.
bilal j
Messages
2
Reaction score
0
Hi. I noticed that my phone charger (output: 5V DC) makes a constant high pitched noise when plugged into the wall. It's not too loud but you can hear it when you are within maybe 4 ft of the charger. When I plug my phone in, it starts making intermittent noises. I was wondering what this could be caused by?
 
Engineering news on Phys.org
Most charges are using switching regulators, they oscillates in 10s of KHz, you can hear it if the transformer buzzes.
 
does that mean there is current flow and thus energy loss even without the phone attached?
 
Yes, there is always a little loss if you keep the charger plugged in.
 


There are a few potential reasons why your phone charger is making a high frequency sound. One possibility is that it is due to the internal components of the charger vibrating at a high frequency. This can happen when the charger is converting the AC current from the wall outlet into the DC current that is needed to charge your phone. The process of converting the current can create small vibrations within the charger, which can produce a high pitched sound.

Another potential cause could be electromagnetic interference (EMI). This occurs when the electrical signals within the charger interact with other electronic devices or components, causing them to vibrate and produce sound. This can be more noticeable when your phone is plugged in and drawing power from the charger, as it can create more electrical activity and potential for interference.

Additionally, it is also possible that the sound is being produced by a faulty or damaged component within the charger. If this is the case, it is important to stop using the charger and have it checked by a professional to avoid any potential safety hazards.

Overall, the high frequency sound from your phone charger is likely due to the internal components vibrating or EMI, which are common occurrences in electronic devices. However, if the sound becomes louder or more frequent, it is recommended to have the charger inspected to ensure safe and proper functioning.
 
Thread 'Weird near-field phenomenon I get in my EM simulation'
I recently made a basic simulation of wire antennas and I am not sure if the near field in my simulation is modeled correctly. One of the things that worry me is the fact that sometimes I see in my simulation "movements" in the near field that seems to be faster than the speed of wave propagation I defined (the speed of light in the simulation). Specifically I see "nodes" of low amplitude in the E field that are quickly "emitted" from the antenna and then slow down as they approach the far...
Hello dear reader, a brief introduction: Some 4 years ago someone started developing health related issues, apparently due to exposure to RF & ELF related frequencies and/or fields (Magnetic). This is currently becoming known as EHS. (Electromagnetic hypersensitivity is a claimed sensitivity to electromagnetic fields, to which adverse symptoms are attributed.) She experiences a deep burning sensation throughout her entire body, leaving her in pain and exhausted after a pulse has occurred...
Back
Top