Wind Turbine: 8MWatts Increase at 650ft?

AI Thread Summary
The discussion focuses on calculating the increase in wind speed and power output of a wind turbine when raised from 450 feet to 650 feet. Using the formula for wind speed as proportional to the seventh root of altitude, the calculations show that the wind speed increases from 2.39 to 2.52, indicating a 95% increase in wind speed when calculated correctly. For power output, the values change from 13.6 to 16, resulting in an 85% increase in power. Participants clarify the importance of using the correct final-to-initial ratio in their calculations. Overall, the conversation emphasizes the relationship between altitude, wind speed, and power generation in wind turbines.
Windseaker
Messages
45
Reaction score
0
1. Wind turbine produces 8MWatts
(If wind speed is proportional to the 7th root of altitude)
(Wind power is proportional to the cube of wind speed
First the turbine is at 450ft then reconstructed at 650ft, how much faster is wind speed? and how much more power?2.
Sw= 7√Altitude, Pw= (Sw)33.

a. 7√450 =2.39 and 7√650 =2.52 ,then output/input , so 2.39/2.52 =.948 or
95% more?

b. (2.39)3=13.6 and (2.52)3=16 , so 13.6/16 =.85 or
85% more?
 
Last edited:
Physics news on Phys.org
Sw= 7√Altitude, Pw= (Sw)3
Pw = [(A)^1/7]^3 = (A)^3/7
 
Pw = [(A)^1/7]^3 = (A)^3/7

your saying that power is:
(450')^3/7= Pw1
(650')^3/7= Pw2

and Pw2-Pw1= how much more power?

what happened to the differents in wind speed first?
 
Windseaker said:
3.

a. 7√450 =2.39 and 7√650 =2.52 ,then output/input , so 2.39/2.52 =.948 or
95% more?
Not quite, you have things backwards. You can think of it in terms of final/initial (I guess that's what you mean by output/input). So it would be 2.52/2.39=___?, since the turbine was at 450 ft first and later moved to 650 ft.

b. (2.39)3=13.6 and (2.52)3=16 , so 13.6/16 =.85 or
85% more?
Again, take the value for 650 ft and divide it by the value for 450 ft.
 
Thank you for expanding the thought.




Redbelly98 said:
Not quite, you have things backwards. You can think of it in terms of final/initial (I guess that's what you mean by output/input). So it would be 2.52/2.39=___?, since the turbine was at 450 ft first and later moved to 650 ft.


Again, take the value for 650 ft and divide it by the value for 450 ft.
 
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top