Materials and Chemical Engineering Forum

Troubleshooting Ion Exchange Membrane Desalination with Comsol - Low Voltage Fix

What state is Iron most magnetic?

Can Nafion and Eudragit form a precipitated interpolyelectrolyte complex?

The Role of Baffles in a Reactor: Increasing Mixing & Heat Exchange

E-Glass Properties: Find E, Poisson's Ratio, G

Induction Foil Iron vs. Aluminum

Carbon Extraction from the atmosphere

Material properties for annealing cage

Hydrogel limiting diffusion of calcium

Can Sorbothane withstand a 2000 lb load for shock absorbence?

Looking for Phase Diagrams for Mag-Thor alloys

How do gas reactions affect volume in a fixed container?

Thermal Expansion of a shrink-fit collar

What is the coldest freezer pack material that can stay soft?

Does Benzidine polymerize in presence of alcohol?

Is Compressive Strength of Concrete Inversely Proportional to Surface Area?

Question about Auto-Ignition Temperature

How Do Levenspiel Plots Determine CSTR Volume for Increasing Reaction Rates?

Moist Chlorine & Hydrogen Psychrometric or Mollier Chart

Does the type of reactor affect the rate law in a chemical reaction?

Volumetric flow rate through a pipe vented to atmosphere

Stress calculations for acrylic

Fluids with high expansion ratios that do not leave the liquid state

Deposit Indium Film on Metal Bar - Cheap Prototyping Method

Ag Composition) of 5nm Au & 10nm Ag Film After Annealing

What Are the Best Resources for Learning About Polymers?

Optimizing Chemical Injection for Viscous Polymer in Winter Conditions

PFR Reaction Rate: Understanding CSTR vs. PFR

PFR vs. CSTR reactor size for various order reactions

How do you calculate the minimum film thickness?

Plano-convex vs Double-convex (fly's eye) cylindrical microlens array

Looking for oxidizing color-changing material

Creating Superalloys: How is Cobalt-Based Alloy Produced?

Chemical Process Flow Diagram Software

Practical experience of minimum tension possible of a membrane

Electroplating copper on top of anodized aluminum

What is the significance of the change in concentration over time in a CSTR?

Creating Small Expandable Packages for Volatile Material

Find Steel Tubing Size for 4000lb Log Ramp - 8' Long

Calculating Velocity in a Pipe: Flow Rate 0.01, Diameter 90mm

How to Produce Super Phosphate Using Clean Compressed Air and Calcium Sulphate?

Steel Strength Chart | A36 Square Tubing Tension Strengths

What Happens When Carbonate Ores Are Roasted and Sulphide Ores Calcinated?

Can paper be electroplated without damaging it?

Granules from fine powder: Agglomaration

Chemical engineering problems in metallurgy industry

Spheroidite vs. Pearlite: Understanding Steel Alloy Microstructures

Barium Titanate Sintered or in Polymers?

Ambient temperature of materials.

Severe Condition (85°C/95% or Water Immersion)

Help with the combustion of gas inside of a Hydocarbon ring

Why Does Cementite Color Differ in Micrographs of Steel?

What Is the Meaning of Equilibrium Solidification Temperature in Supercooling?

Grain boundary sliding in creep

Low Thermal Expansion Coefficient Glass Tube

Microfluidics: asymmetric and symmetric t-junctions

Practical question liquid nitrogen stump removal

Soft to rigid construction materials

Intermetallics and solid solution

Creating a monstrous e-cigarette prototype

Weight difference of graphene vs copper?

A question about residual stress

Wood vs Metal (Interface Material)

Physics dilettante needs help with product development

Hand Moldable Plastic: Find Material for Room Temp Shaping

How to increase reaction rate using EM radiation?

Double pipe heat exchanger design guide

A question on the abundance of the elements

Calculation of volume after phase change

Osmium Alloys and UV reflection

Dissociation Well water at great Depths and Retrieve Effortlessly

How the ductility of metal change when grains is decreased ?

Spelling Error in Energy Storage Findings?

What is "Proximity Effect Control" in ebeam lithography?

Solar Glass: How to decide if it's hard enough

• Poll

Glued Versus Solid Model in Modal Analysis

Low friction/ "ductile" material?

Formula for deflection of 6061 T6 hollow tube, .

What's the best way for this to work?

What Material is Best for Mounting a Heavy, Non-Magnetic Apparatus?

How to calculate the energy required to cut a specific material?

Double Pipe Heat Exchanger books

High capacity pneumatic positive displacement pump

How to determine the max load capcity of a steel square tube

Surface cooling - Rayleigh, Prandtl and Grashof numbers

How effective are honeycomb plates at preventing "bend"?

Why do grease, cheese, butter, jam, etc., stick to smooth surfaces?

Maximum Load on a Plastic Sheet

Carbon steel fatigue and temperature properties

How Do Stiffener Beads Enhance Metal Link Rigidity?

Young's modulus of rubber sheet using the inflation technique

Can SRK EOS Employ NRTL Activity Coefficients?

Completely dissolving a gas into a liquid

Lever Rule: Determining Amount of Liquid & Solid

Longitudinal heat transfer material?

Is there a general equation for convection of a fin's side surface

Relevance of electrostatic precipitation technology

Absorbance Simulation of Gold Octahedra

Differences between the polymers Silicone 184 and Siloprene K1000?

Dealing with Detergents in sewage treatment plants