A Woman Running Towards a Bus Which Pulls away

  • Thread starter Thread starter Phonetic
  • Start date Start date
  • Tags Tags
    Bus Running
AI Thread Summary
A woman is running at a constant speed of 5.0 m/s to catch a bus that accelerates from rest at 1.0 m/s² when it is 11 meters away. The calculations involve determining the time it takes for her to reach the bus using kinematic equations. The initial approach yielded a time of approximately 3.39 seconds, but further analysis suggests setting the equations for both the woman and the bus equal to find the correct time. The final equation derived is 10t - t² = 22, leading to a more accurate solution for the time taken to catch the bus. The discussion emphasizes the importance of correctly setting initial positions and using appropriate equations for motion.
Phonetic
Messages
2
Reaction score
0

Homework Statement


A woman is running at a constant velocity of 5.0m/s in an attempt to catch a bus. When she is 11m from the bus, it pulls away with a constant acceleration of +1.0m/s2. From this point, how much time does it take her to reach the bus if she keeps running with the same velocity?



2. The attempt at a solution
Finding the time
d = di + vit+1/2at2
0 = 11 + 0t + 1/2(1)t2
0 = 11 + .5t2
t = sqrt of 11.5
t = 3.39

Distance traveled by woman
d = v*t
d = 5*3.39
d = 16.95m

Distance traveled by bus
vf = vi + at
= 0+1*3.39
vf = 3.39

d = 1/2 (vi + vf)t
d = 1/2 (3.39) 3.39
d = 1/2 * 11.5
d = 5.75
The bus traveled 5.75m, add in the initial distance of 11m
16.75m

That's the closest I can get to the answer. Any guidance on where I want wrong? Thanks!
 
Physics news on Phys.org
Set your initial position to Zero for woman, and initial position to 11 for the bus. Set these two equations equal to solve.

Woman d1=0+5t
Bus d2=11+.5t2

When both positions are equal she will reach the bus
d1=d2

5t = 11+.5t2
10t-t2 = 22
t=5±√3

______________________________
If everyone is thinking alike, then somebody isn't thinking

Garrett Stauber​
 
Last edited:
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top