Advice on my Tennis Ball Launcher

AI Thread Summary
The discussion focuses on designing a tennis ball launcher that can shoot balls over 90 meters while ensuring accuracy to hit a pie pan 10 meters away. The launcher must be safe, avoiding explosive, combustion, or electrical mechanisms, and should be fired from a distance of 2 meters. Suggested designs include a crossbow effect, catapults, and trebuchets, with materials like PVC and wood being considered for ease of construction. The base dimensions are limited to 0.5 meters by 0.5 meters, with a maximum height of 2 meters. The user seeks beginner-friendly instructions, videos, and references to assist in building the launcher.
MMAiNNovaToR
Messages
2
Reaction score
0
Advice on my Tennis Ball Launcher...That Shoots 90 Meters

It can't rely on anything explosive, combustion, or electricity (anything dangerous) and has to be fired from a distance of 2 meters.

2 parts: Distance- It has to shoot 90 or more meters
Accuracy- shoot the tennis ball into a pie pan 10 meters away

I could use any design but don't know what design is best suited for this project. I was planning on building a triangular type base, firing the ball at a 45 degree angle and using some type of crossbow effect to shoot it. Some materials I have in mind so far are PVC and wood; I am open to any material that is easy for a beginner to work with, but I don't know what to shoot the tennis ball with if I do a crossbow effect. Some other designs that are reccomended are catapults and trebuchets. Again, I am open to any design that is easy for a beginner to build. The base can't be bigger than .5 meters by .5m. Max height is 2 meters.

Any suggestions would help-including videos, images, instructions, notes, references, etc. I am a Junior at high school with no experience in constructing these types of mechanisms, so I want to build something quite simple and suitable for me. Thanks.
 
Last edited:
Physics news on Phys.org


MMAiNNovaToR said:
It can't rely on anything explosive, combustion, or electricity (anything dangerous) and has to be fired from a distance of 2 meters.

2 parts: Distance- It has to shoot 90 or more meters
Accuracy- shoot the tennis ball into a pie pan 10 meters away

I could use any design but don't know what design is best suited for this project. I was planning on building a triangular type base, firing the ball at a 45 degree angle and using some type of crossbow effect to shoot it. Some materials I have in mind so far are PVC and wood; I am open to any material that is easy for a beginner to work with, but I don't know what to shoot the tennis ball with if I do a crossbow effect. Some other designs that are reccomended are catapults and trebuchets. Again, I am open to any design that is easy for a beginner to build. The base can't be bigger than .5 meters by .5m. Max height is 2 meters.

Any suggestions would help-including videos, images, instructions, notes, references, etc. I am a Junior at high school with no experience in constructing these types of mechanisms, so I want to build something quite simple and suitable for me. Thanks.

This thing needs to fire from far away, and I don't know what to do.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top