Best location for a light bulb filament using a concave mirror?

AI Thread Summary
The optimal placement for a light bulb filament in a spotlight using a concave mirror is typically at the focal point to achieve parallel light beams. However, there is debate about whether slight divergence of light beams is preferable for broader coverage. Some slide projectors position the bulb at the center of curvature, which is distinct from the focal point. It's important to note that a light bulb is not a perfect point source, leading to some spread in the light output. Understanding these nuances can help in effectively utilizing concave mirrors in lighting applications.
reganw
Messages
19
Reaction score
0
Where is the best location for a light bulb filament to be placed in a spotlight, when using a concave mirror?

It makes the most sense to put it at the focal point of the mirror if you want parallel light beams but are you supposed to have parallel light beams when you use a spotlight? Or do you want the beams to diverge slightly so the light covers a larger area? I also read that in some slide projectors, the light bulb is placed at the center of curvature.. is this the same thing as radius of curvature? Or are they meaning focal point? I'm just a little unclear..

Thank you in advance for your help!
 
Physics news on Phys.org
reganw said:
Where is the best location for a light bulb filament to be placed in a spotlight, when using a concave mirror?

It makes the most sense to put it at the focal point of the mirror if you want parallel light beams but are you supposed to have parallel light beams when you use a spotlight? Or do you want the beams to diverge slightly so the light covers a larger area? I also read that in some slide projectors, the light bulb is placed at the center of curvature.. is this the same thing as radius of curvature? Or are they meaning focal point? I'm just a little unclear..

Thank you in advance for your help!

Don't forget that no light bulb is an actual point source of light, so while some point on the filament may be exactly at the focus, the rest of is will be slightly off, giving a certain amount of spread.

Peter
 
PeterO said:
Don't forget that no light bulb is an actual point source of light, so while some point on the filament may be exactly at the focus, the rest of is will be slightly off, giving a certain amount of spread.

Peter

Spinnor said:

Okay, that's great, thank you to the both of you! I can put together a sufficient answer with all of that info. Thanks again.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top