Calculating Diopters for Bifocals: What Power Should They Have?

  • Thread starter Thread starter DrMcDreamy
  • Start date Start date
  • Tags Tags
    Calculation
AI Thread Summary
The discussion centers on calculating the appropriate diopter power for bifocals based on a person's vision needs. For distant vision, the upper portion of the bifocals should accommodate a range from 49 cm to 1.5 m, leading to a calculated power of approximately 2.04 D or 0.67 D, indicating confusion in the calculations. The lower portion, designed for comfortable viewing at 25 cm, requires a power of 4 D. The original poster expresses uncertainty about their calculations and seeks clarification. Accurate diopter calculations are essential for effective bifocal prescriptions.
DrMcDreamy
Messages
68
Reaction score
0

Homework Statement



This is a 2 part problem:

4- A person is to be fitted with bifocals. She can see clearly when the object is between 49 cm and 1.5 m from the eye. The upper portions of the bifocals should be designed to enable her to see distant objects clearly. What power should they have? Answer in units of diopters.

5- The lower portions of the bifocals should en- able her to see objects comfortably at 25 cm. What power should they have? Answer in units of diopters.

Homework Equations



P=\frac{1}{f}

The Attempt at a Solution



4- P = \frac{1}{0.49 m} = 2.04 x 100 = 204 D
or it might be P = \frac{1}{1.5 m} = 0.666 x 100 = 66.6 D

5- P = \frac{1}{0.25 m} = 4 x 100 = 400 D

I know I am doing something wrong can you help me?! TIA
 
Physics news on Phys.org


*bump*
 


*bump*
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top