Calculating the magnitude of the net force bewteen charges

AI Thread Summary
The discussion focuses on calculating the net force experienced by a -3Q charged ball due to other surrounding charges in a symmetric arrangement. The participant successfully calculated the force from +3Q and +Q charges but struggles with forces from -5Q charges due to their diagonal placement. They initially believed opposing diagonal forces would cancel out but later acknowledged that the x-components of the forces from the -5Q charges would not cancel, resulting in a net horizontal force. The principle of superposition is emphasized, indicating that the total force is the sum of individual forces, with the y-components canceling while the x-components contribute to the net force. Understanding these components is crucial for accurately calculating the net force on the -3Q charge.
thrills4ever
Messages
6
Reaction score
0

Homework Statement



Nine different charged balls, which we treat as point charges, are arranged in a highly symmetric pattern around a square. Note that the value of Q is 4.00 x 10-6C, and L = 30.0 cm

Image: http://www.webassign.net/userimages/81224?db=v4net

Homework Equations



1) What is the magnitude of the net force experienced by the ball with the -3Q charge due to the +3Q and +Q charged balls only?

2) What is the magnitude of the net force experienced by the ball with the -3Q charge due to the four charged balls with charges of -5Q?

3 )What is the magnitude of the net force experienced by the ball with the -3Q charge due to the two charged balls with charges of +2Q?

4) Use your previous three results to find the magnitude of the net force experienced by the ball with the -3Q charge due to the other 8 charged balls.

The Attempt at a Solution



1) I got this part correct: I understand how to solve for the force when the point charges are in the straight line

My work is as follows:

F3 = F31 + F32
= k(-3Q)(Q) / L^2 + k(3Q)(+3Q) / 4L^2
= 5.25k(Q)^2 / L^2
= 8.39

2) and 3) :

Here is where I do not understand how to solve for the force when there are diagonals involved.

If I am correct in my thinking for 2) then does the -3Q ball experience 2 diagonal forces from the 2 left -5Q balls and a straight force to the right from the 2 right -5Q balls?

In my calculation I did F53 = 15kq^2 / 3L^2, simplifying to 5kq^2 / L^2 which gives me 7.99 I believe. Since there are essentially 2 diagonal forces, do I multiply this by 2 and then add the other force which is directed right by doing 7.99cos(30 degrees)?

Thanks for all the input!
 
Physics news on Phys.org
The first part of your reasoning is right.

But consider only the right most column. If we consider this column by itself, why do you think there would be a net force?
 
Last edited:
well i tried putting in 0 for the answer and it did not work because I initially thought the opposing diagonals cancel each other out, but apparently that is not the case.
 
Sorry I meant right, why do you think there would be a force on the right most column?

The two 5q balls on the left do give you a net force that is horizontal -- which can be easily seen if you componentize the forces and use superposition.

Sorry for the mix up.
 
I see what you mean..im not sure how to use superposition in this case since both the forces from the two 5q balls on the left are in opposing diagonals. So the resultant force is directed to the right horizontally correct? I tried finding the F53x and F53y components but i think that both diagonals produced y components that cancel each other out. I am not sure how to proceed with the question.
 
Last edited:
The principal of superposition basically means that the total force is the sum of the forces. You are correct and finding that the y-component of the two balls will cancel out since they are equal and opposite, however you're still left with the x-components.
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top