Confused by Geometry Problem - Can You Help?

  • Thread starter Thread starter Imparcticle
  • Start date Start date
  • Tags Tags
    Confused Geometry
AI Thread Summary
The geometry problem involves finding the measure of angle S, which is stated to be 20 more than four times its supplement. The initial setup incorrectly defines the supplement and leads to a miscalculation. The correct approach requires recognizing that the supplement of angle S is 180 - x, not x - 180. The user realizes their mistake in the calculation and seeks clarification on the proper method to solve the problem. Understanding the definitions and relationships between angles is crucial for arriving at the correct answer.
Imparcticle
Messages
572
Reaction score
4
I was doing my geometry homework earlier and came across a problem:

Find m<S if m<S is 20 more than four times its supplement.

What I did:
m<S= x
supplement of m<S: x = (x-180)

how I worked it out:
x=4(x-180) + 20
x=4x-700
700=3x
233.333... = x

My answer for x is obviously wrong because when I try to find m<S, I get 233.33... again:
x=4(2.333...-180) +20
4(53.33...)= 213.333... + 20 = 233.3333...

This evidently does not make any sense at all. The problem said "supplement", and 233.333... is most certainly not an angle measure which agree with the definition of supplement, I believe.

Please help.
 
Physics news on Phys.org
180-x .
 
okay. That does not make a difference.
 
yes .
 
Imparcticle said:
okay. That does not make a difference.

my mistake. It does make a difference.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top