Finding Distance from the Origin Given Velocity Graph

AI Thread Summary
The discussion revolves around calculating the distance of a rocket-powered hockey puck from the origin after 4 seconds, using its velocity graphs. The user initially calculated the areas under the velocity graphs to find the x and y components of distance, resulting in a total distance of 136 cm. However, the answer was marked incorrect due to formatting issues related to significant figures. After clarification, the correct answer was determined to be 1.4 meters when rounded to two significant figures. The user successfully resolved the issue after understanding the requirement for significant figures.
pocketofcandy
Messages
3
Reaction score
0

Homework Statement


A rocket-powered hockey puck move along a horizontal friction-less table. The figure (link posted below) shows the graphs of vx and vy, the x- and y- components of the puck's velocity. The puck starts at the origin. How far from the origin is the puck at 4 seconds?

Here is the picture of the two graphs: https://session.masteringphysics.com/problemAsset/1384028/7/4-9.jpg

[moderator's edit: Here's an inserted copy of the image just in case the link evaporates some day]
upload_2016-9-18_14-15-13.png

Homework Equations


area of a triangle: 1/2(b)(h)
area of a square: (l)(w)
sqrt(x2+y2)

The Attempt at a Solution


It appears on the on the vx graph that the velocity increases by an increment of 8 cm every second. (It is confirmed to be at 40 cm at 5 seconds). So I thought the way to do this would be to find the area under both graphs from 0 to 4 seconds.
On the vx graph, I found the area to be 1/2*4*32 = 64 cm. On the vy graph, I found the area to be 30*4 = 120 cm. Then I tried to use the formula for distance to solve and came out with:
sqrt(642 + 1202) = 136 cm.

However, whenever I put this answer in, it says it is incorrect. I guess I'm not really the best at physics, so I'm wondering where it was I made the error? I appreciate any help.
 
Physics news on Phys.org
Strange as your answer seems to be correct at least from my judgement
I suppose make sure your answer is rounded correctly and that if required your answer is inputted with the correct units
Other than that I do not see an issue with your method
Maybe significant figures or something?
 
Oh I see now that the site wants the answer to two significant figures. So that would be 1.4 meters then?
 
pocketofcandy said:
Oh I see now that the site wants the answer to two significant figures. So that would be 1.4 meters then?
I believe so
 
It worked that time. Thank you!
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top