Finding the Mass Combination for 1/2 g Acceleration in an Atwood Machine

AI Thread Summary
To achieve an acceleration of 1/2 g in an Atwood machine, the correct approach involves using the formula a = g(m1 - m2)/(m1 + m2). The value of g is approximately 9.8 m/s², so for 1/2 g, you would use 4.9 m/s² as the target acceleration. By rearranging the equations of motion for the two masses, one can derive a relationship between m1 and m2 that satisfies this condition. The discussion highlights the importance of correctly interpreting the constants and ratios involved in the problem. Ultimately, the solution is simpler than initially perceived, emphasizing the need for clarity in problem-solving.
blimkie
Messages
111
Reaction score
0
im stuck on the last question of this lab. "what combination or masses would make the accelration of an atwood machine equal to 1/2 g?"

a = g (m1 - m2/m1=m2)

so i have to find out what m1 and m2 are eual to in that forumula if g = 1/2

im thinking a is equal to 9.81 because the accelration on an atwood machine is caused by gravity

im stuck help would be nice:smile:

ive tryed rearangeing forumlas but i hvant got anywhere yet
 
Physics news on Phys.org
blimkie said:
im stuck on the last question of this lab. "what combination or masses would make the accelration of an atwood machine equal to 1/2 g?"

a = g (m1 - m2/m1=m2)

so i have to find out what m1 and m2 are eual to in that forumula if g = 1/2

im thinking a is equal to 9.81 because the accelration on an atwood machine is caused by gravity

I think you're a bit confused because near the surface of Earth g is always about 9.8. So you have the formula for acceleration which is correct and you want that to be equal to (1/2)*g so if you set those equal the "g"s on both sides will go away and you should be able to figure something out as to what ratio the masses must be in relative to each other in order to get an acceleration of (1/2)g
 
still hvaing hard time here if i plug in 1/2 for g and 1/2 for a i end up with m1-m2 = m1 + m2
nothing in clicking yet I am having a rough time here
 
blimkie said:
still hvaing hard time here if i plug in 1/2 for g and 1/2 for a i end up with m1-m2 = m1 + m2
nothing in clicking yet I am having a rough time here

g is a constant. What does that mean? You cannot plug a value in for g, near the surface of Earth g is always about 9.8. You want the acceleration to equal (1/2)g so plug that in for a, and then look at teh equation resulting.
 
Look at the sum of the forces on the masses of the atwood machine
T-m_{1}g=m_{1}a \hspace{0.5cm} -T+m_{2}g=m_{2} a
Now add the two equations together, and you get an expression in terms of the coupled acceleration, gravity and masses. Now eliminate gravity, with desired acceleration
g =2 a
and now we have an equation totally in terms of the masses, which allows us to solve . hope this helps, sincerely, x
 
meh ok i figured it out it was really simple actually and i was going about the problem wrong I am just tired haha
 
Thread 'Collision of a bullet on a rod-string system: query'
In this question, I have a question. I am NOT trying to solve it, but it is just a conceptual question. Consider the point on the rod, which connects the string and the rod. My question: just before and after the collision, is ANGULAR momentum CONSERVED about this point? Lets call the point which connects the string and rod as P. Why am I asking this? : it is clear from the scenario that the point of concern, which connects the string and the rod, moves in a circular path due to the string...
Back
Top