Force balance equations with moving base

AI Thread Summary
The discussion focuses on solving force balance equations for a system with a static base A and a movable base B. The user is uncertain about how to mark forces at the movable base, questioning whether to include horizontal components (Bx) or only vertical components (By). They seek clarification on the applicability of trigonometry for calculating forces at base B. The conversation emphasizes the need to understand force components in dynamic systems. Properly identifying these forces is crucial for accurate calculations in mechanics.
rihitz
Messages
16
Reaction score
1

Homework Statement


IMG_20160929_162844.jpg

Given:
AD=DC = 9m
P=78kN
S=25Kn
Angle alpha = 35 deg
A is static but B is movable

I need to solve forces on the bases A and B
I do not understand where do I mark the forces if there is a base that can move.

Homework Equations

The Attempt at a Solution


My attempt:
IMG_20160929_162955.jpg

I am not sure whether there should be Bx or Ax.[/B]
 
Physics news on Phys.org
Is there only By on the base B? If so, is the B vector still calculateable with trigonometry, or the only force there will be By, without any Bx?
 

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »

Thread 'Rolling without slipping on a curved surface'

Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
View full post »

Similar threads

Did I make a mistake in my balance force equations for homework?
Replies
3
Views
1K
Forces applied to a spring-loaded gas pedal
Replies
7
Views
1K
Force equations: Force on ground by angled supports
Replies
21
Views
2K
Calculating the Force and Torque on a current loop
Replies
3
Views
4K
Cylinder balancing in a single plane and in two planes
Replies
1
Views
1K
Solving for λ, a, and Vmax: An Analysis of Energy Balance and SHM
Replies
21
Views
3K
A moving boat with a flag on its mast
Replies
15
Views
976
Is the balance of forces equation correct for a tube immersed in alcohol?
Replies
8
Views
2K
Maximum tension in thread connecting loads
Replies
13
Views
1K
Balancing Forces on a Scale: Man with Pulleys and Tensions
Replies
7
Views
2K

Hot Threads

Recent Insights

Back
Top