How Do You Calculate the Total Energy of a Rolling Sphere?

  • Thread starter Thread starter Jtappan
  • Start date Start date
  • Tags Tags
    Energy Rolling
AI Thread Summary
To calculate the total energy of a rolling sphere, both translational and rotational kinetic energy must be considered, along with potential energy when it rises on an incline. The translational kinetic energy is calculated using K = 1/2 mv², while rotational energy is determined with T = 1/2 Iω², where the moment of inertia I for a solid sphere is I = 2/5 mr². The potential energy at height h is given by U = mgh. Since energy is conserved in this scenario without friction, the total energy can be found by summing these components.
Jtappan
Messages
95
Reaction score
0

Homework Statement



A solid sphere of mass 0.599 kg rolls without slipping along a horizontal surface with a translational speed of 5.31 m/s. It comes to an incline that makes an angle of 33° with the horizontal surface. Neglect energy losses due to friction.


(a) What is the total energy of the rolling sphere?
________ J
(b) To what vertical height above the horizontal surface does the sphere rise on the incline?
________ m


Homework Equations



?

The Attempt at a Solution



What equations would I use for this problem? any other information would be great thanks!
 
Physics news on Phys.org
You can't find ANY equations?
 
Kinetic energy is given by K=\frac{1}{2}mv^2

Rotational energy is given by T=\frac{1}{2}I\omega^2

The moment of intertia for a solid sphere is given by I=\frac{2}{5}mr^2

Potential energy is given by U=mgh
 
You will need one more equation to solve this.

v=\omega r
 
Some hints from a fellow learner:

- How do you calculate linear (aka translational) movement energy for a body?
- What is the difference between kinetic and potential energies and how do you calculate them?
- Is energy conserved, if there is no friction or drag (aka energy losses)?
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top