How Is Static Friction Affecting the Boy and the Crate's Movement?

AI Thread Summary
The discussion revolves around a boy struggling to push a crate, prompting questions about the crate's mass and the effects of static and kinetic friction. The boy's mass is given as 51.0 kg, with static and kinetic coefficients of friction provided for both the boy's shoes and the crate. Participants analyze the forces acting on both the boy and the crate, emphasizing the balance of forces and the relationship between static and kinetic friction. There is a realization that sloppy calculations led to confusion, but the correct understanding of the forces was ultimately confirmed. The conversation highlights the importance of careful mathematical manipulation in physics problems.
marissa12
Messages
11
Reaction score
0
You see the boy next door trying to push a crate down the sidewalk. He can barely keep it moving, and his feet occasionally slip. You start to wonder how heavy the crate is. You call to ask the boy his mass, and he replies " 51.0 kg." From your recent physics class you estimate that the static and kinetic coefficients of friction are 0.900 and 0.4 for the boy's shoes, and 0.5 and 0.2 for the crate.

what is the mass of the crate?

<<Forces acting on the boy>>

X= F(static friction)-F(box on boy)=ma=0 F(static f)=F(boy on box)

y= Fg=Fn

<<Forces acting on box>>

X= F(boy on box)- F(kinetic friction)=ma=0 F(boy on b)= F(kinetic friction)

y: Fn=Fg

and the F(boy on b)= -F(box on boy)= F


i can't understand why this isn't working if i plug in all my numbers and manipulate the equations.
 
Physics news on Phys.org
marissa12 said:
<<Forces acting on the boy>>

X= F(static friction)-F(box on boy)=ma=0 F(static f)=F(boy on box)
Good. (I assume you meant F(box on boy).)
<<Forces acting on box>>

X= F(boy on box)- F(kinetic friction)=ma=0 F(boy on b)= F(kinetic friction)
Good.

and the F(boy on b)= -F(box on boy)= F
Good. In your earlier equations F(boy on box) & F(box on boy) represent the magnitudes of those forces, so F(boy on box) = F(box on boy).

Now put it all together: If F = A and F = B, then A = B. (That's a hint.)
 
hah yay.. i had it right the whole time.. its just i wrote my work soo sloppy i messed up the numbers. thank you !
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top