How to Calculate the Resistance of Nichrome in a Series Circuit with Graphite?

  • Thread starter Thread starter Ugnius
  • Start date Start date
  • Tags Tags
    Resistance Wire
AI Thread Summary
To calculate the resistance of nichrome in a series circuit with graphite, the total resistance is given as 5.8 ohms, which is independent of temperature. The temperature coefficients of resistance for graphite and nichrome are -0.0005 K⁻¹ and 0.0004 K⁻¹, respectively. The resistance of the graphite wire (R_G) and the nichrome wire (R_N) can be expressed in relation to each other using these coefficients. The key is to set up equations that incorporate these resistances and their temperature coefficients. This approach will lead to determining the resistance of the nichrome wire at the reference temperature.
Ugnius
Messages
54
Reaction score
10
Homework Statement
Two wires are connected in series. One made of coal , other one of nichrome. Series resistance is 5.8 ohms , what is the resistance of nichrome wire? Temperature coef. of resistance of coal -0.0005K^-1 , 0.0004K^-1 of nichrome
Relevant Equations
.
I don't really have any equations or idea how to solve this. I searched for relevant equations and only R=Rref(1+α(T-Tref)) pops up. I wasn't given any temperatures so I guess there must be some other way to solve this. Maybe anyone has idea how to approach this?
 
Physics news on Phys.org
Also it's mentioned that this compounds resistance isn't affected by temperature. so maybe that would make difference
 
Ugnius said:
Also it's mentioned that this compounds resistance isn't affected by temperature. so maybe that would make difference
Yes, that's critical. It let's you find the ratio of the two lengths. But there still doesn't seem to be quite enough info. Are you sure you have stated it completely?
(Coal?)

Edit: it let's you find the ratio of the resistances, not the ratio of the lengths, so it is enough information.
 
Last edited:
1634758454673.png

So this is the statement in my native language, i will translate it word by word.
E27. In order to get a conductor , with resistance independant from temperature , we combine coal and nichrome wires in series. If that stated combination has a resistance of 5.8 ohm , what is resistance of nichrome? αcoal=-0.0005K-1 , αnichrome=0.0004K-1. Thats it.
 
Ugnius said:
View attachment 290949
So this is the statement in my native language, i will translate it word by word.
E27. In order to get a conductor , with resistance independant from temperature , we combine coal and nichrome wires in series. If that stated combination has a resistance of 5.8 ohm , what is resistance of nichrome? αcoal=-0.0005K-1 , αnichrome=0.0004K-1. Thats it.
Maybe the question is this:

A graphite wire and a nichrome wire are connected in series. Their total resistance is 5.8Ω and is independent of temperature.

For some reference temperature [probably 20ºC but it doesn’t matter] the temperature coefficients of resistance of graphite and nichrome are -0.0005K⁻¹ and 0.0004K⁻¹ respectively.

What is the resistance of the nichrome wire at the reference temperature?
_________

Hint: Call the resistances of the graphite and nichrome wires at the reference temperature ##R_G## and ##R_N##. Can you write down any equations, based on the information in the question, using ##R_G## and ##R_N##?
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...

Similar threads

Back
Top