Hydrogen and it's Specific Heat.

AI Thread Summary
Hydrogen has a high specific heat capacity, making it a potential coolant, but its flammability poses significant safety risks in many applications. It is indeed used as a coolant in large electrical generators, where its low density is beneficial, although this raises concerns about safety due to its ignition potential. The specific heat of hydrogen does not influence its chemical reactivity; thus, its effectiveness as a coolant is independent of its behavior as a fuel. The use of hydrogen in cooling systems is limited to specific industrial contexts where safety measures are in place. Overall, while hydrogen can function as a coolant, its application is carefully managed due to its flammable nature.
Amit Kumar
Messages
1
Reaction score
0
Hello,

I had a few questions regarding hydrogen.
I know for a fact that hydrogen has a high value of specific heat.
My questions are:
1). Isn't hydrogen supposed to be a good coolant, and if it is is it actually used ?
2). If it is a good coolant how does it work as a fuel ?

I hope these questions make sense, and thanks in advance.
 
Science news on Phys.org
Amit Kumar said:
Hello,

I had a few questions regarding hydrogen.
I know for a fact that hydrogen has a high value of specific heat.
My questions are:
1). Isn't hydrogen supposed to be a good coolant, and if it is is it actually used ?
2). If it is a good coolant how does it work as a fuel ?

I hope these questions make sense, and thanks in advance.
It's tricky using elemental hydrogen in many applications because it is highly flammable in the presence of oxygen and open flames, static electricity, etc.

Hydrogen's physical properties, like specific heat capacity, are separate from its chemical characteristics. Whether or not hydrogen is a good coolant has nothing to do with whether it will ignite if mixed with oxygen and a spark is made. :))

Here's what happens:

OB-JO765_0814hi_G_20100814162559.jpg
 
  • Like
Likes Vanadium 50
Been around 40 years since I took basic physics in college and while I remember doing some examples of insulation values / energy conduction, I doubt I could to the math now even if I could find the formulas. I have some some corrugated plastic sheet (think of the plastic signs you see on the side of the road) that is used in bee hives. Also have some used in a green house though a bit different in dimensions than this example but the general approach should still apply. Typically, both...
Problem: You’re an Uber driver with a Tesla Model 3. Today’s low: 30F, high: 65F. You want to reach a USD$ profit target in the least number of hours, but your choices could have added cost. Do you preheat the battery only when you are headed to the charging station (to increase the charging rate by warming the battery — however the battery might not be “warm enough” when your reach the charger and thus slower charging rates), or do you always “navigate to the charger” the entire day (which...
Thread 'Is Callen right in claiming dQ=TdS for all quasi-static processes?'
Hello! I am currently reading the second edition of Callen's Thermodynamics and an Introduction to Thermostatistics, and I have a question regarding Callen's definition of quasi-static. On page 96, Callen says: Another way of characterizing Callen's definition is that a process is quasi-static if it traces out a continuous curve in the system's configuration space. So far it's all well and good. A little later, Callen claims that the identification of $$TdS$$ as the heat transfer is only...
Back
Top