Initial Angle of Pendulum: Solving for Angle Using SHM Equation

  • Thread starter Thread starter bcjochim07
  • Start date Start date
  • Tags Tags
    Pendulum Shm
AI Thread Summary
The initial angle of the pendulum can be determined by evaluating the equation at t=0, which gives θ(0) = 0.10 rad * cos(π). The phase constant, π, is not the initial angle but rather a parameter that helps define the pendulum's motion. The confusion arises because both the amplitude and phase constant are expressed in terms of angles. To find the initial angle, one must use the formula θ(0) = θmax * cos(phase constant).
bcjochim07
Messages
366
Reaction score
0

Homework Statement


A pendulum's angle is given by (.10 rad)cos(5t + pi)
where t is in sec. What is the initial angle?


Homework Equations





The Attempt at a Solution


Do I plug in t= 0 to get this angle, or is the phase constant this angle? I read that the phase constant specifies initial conditions, but I'm not entirely clear on what it means.
 
Physics news on Phys.org
bcjochim07 said:
Do I plug in t= 0 to get this angle, or is the phase constant this angle? I read that the phase constant specifies initial conditions, but I'm not entirely clear on what it means.
Sounds good to me :approve:. The initial conditions is simply a set of conditions which fix the values of a function at time t=0.
 
According to the equation above pi is my phase constant, but if I plug in t=0, I don't come up with pi as initial angle, so I'm not sure if phase constant and initial angle are the same thing
 
bcjochim07 said:
so I'm not sure if phase constant and initial angle are the same thing
They're not, the phase angle is chosen such that the initial conditions, i.e. the angle at t=0, is satisfied. Does that make sense?
 
I still don't understand. Could you describe it to me using the equation Theta(t) = theta max * cos (omega*t+ phase constant) with the values in the equation in the problem up above?
 
Hi bcjochim07! :smile:

You're confused because, in this case, the amplitude is an angle, just like the phase constant.

Usually, the amplitude is a number or a length or a speed, so there's no confusion … the question would ask for the initial value, or the initial distance, or the initial speed … and you couldn't get that confused with the phase constant!

The initial angle is θ(0), which is θmax * cos (phase constant). :smile:
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...

Similar threads

Replies
15
Views
1K
Replies
32
Views
2K
Replies
3
Views
2K
Replies
14
Views
1K
Replies
9
Views
2K
Replies
7
Views
3K
Replies
1
Views
812
Replies
5
Views
2K
Replies
6
Views
2K
Back
Top