Magnitude and Direction of Puck on Ice

AI Thread Summary
A 0.170 kg puck on frictionless ice is struck by two forces: 350 N at 20.0 degrees and 600 N at 65.0 degrees. The forces were resolved into their x and y components, with the first force yielding 119.7 N (x) and 328.9 N (y), and the second force yielding 543.8 N (x) and 253.6 N (y). The next step involves summing the x and y components to find the resultant force, which is then used to calculate the puck's acceleration using F=ma. The acceleration calculated is 5,193.5 m/s², and the direction can be determined using the arctangent of the ratio of the y to x components. Understanding these calculations is crucial for determining the puck's motion after being struck.
cupra
Messages
3
Reaction score
0

Homework Statement


A 0.170 kg puck rests on frictionless ice. Two hockey players strike the puck simultaneously. #1 force is 350. N exerted at 020.0T, and the other #2 force is 600. N exerted at 065.0T. What is the magnitude and direction of the puck's acceleration at the instant that it is struck.


Homework Equations





The Attempt at a Solution

I have resolved the x and y components of the #1 force using trigonometry (x=119.7N and y=328.9N). I also resolved the x and y components of the #2 force using trigonometry (x=543.8N and y=253.6N). What do I do next?
 
Physics news on Phys.org
Please look at this I think I'm Close
 
cupra said:

Homework Statement


A 0.170 kg puck rests on frictionless ice. Two hockey players strike the puck simultaneously. #1 force is 350. N exerted at 020.0T, and the other #2 force is 600. N exerted at 065.0T. What is the magnitude and direction of the puck's acceleration at the instant that it is struck.

The Attempt at a Solution

I have resolved the x and y components of the #1 force using trigonometry (x=119.7N and y=328.9N). I also resolved the x and y components of the #2 force using trigonometry (x=543.8N and y=253.6N). What do I do next?

I am going to assume that 20.0T here means the angle in degrees to the X-axis which looks like the way you calculated it anyway.

As you have figured out the forces are vectors. What you are trying to figure is the resulting vector. Hence you have separated them into their components ... so just add them together. X's to x's and y's to y's. Then figure the magnitude of the force from the Root of the sum of the squares. Divide by mass to get a.

Your angle will be given by the ratio of the sides.
 
So, Sum of x1 and x2 = 663.5 and Sum of y1 and y2 = 582.5 therefore the hyp. is 882.9
F=ma, a= 5,193.5 m/s2 for my acceleration. This seems bigger than I thought it would be.
How do I figure the direction? I just don't see it in my mind... And THANKS SO MUCH
 
cupra said:
So, Sum of x1 and x2 = 663.5 and Sum of y1 and y2 = 582.5 therefore the hyp. is 882.9
F=ma, a= 5,193.5 m/s2 for my acceleration. This seems bigger than I thought it would be.
How do I figure the direction? I just don't see it in my mind... And THANKS SO MUCH

What is the ratio of y divided by x? Isn't that Tanθ so if you have the value of Tanθ then to find θ just take the ArcTan in degrees of Y/X . That yields θ doesn't it?
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Collision of a bullet on a rod-string system: query'
In this question, I have a question. I am NOT trying to solve it, but it is just a conceptual question. Consider the point on the rod, which connects the string and the rod. My question: just before and after the collision, is ANGULAR momentum CONSERVED about this point? Lets call the point which connects the string and rod as P. Why am I asking this? : it is clear from the scenario that the point of concern, which connects the string and the rod, moves in a circular path due to the string...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...

Similar threads

Back
Top