Particle on inclined plane whose steepness is increasing

AI Thread Summary
The discussion revolves around solving a problem involving a particle on an inclined plane with an increasing angle of inclination using both Newtonian and Lagrangian mechanics. The participant successfully solved the problem using Lagrangian mechanics but encountered discrepancies when applying Newtonian methods. Key insights reveal that the assumption that radial acceleration equals the second derivative of position is incorrect due to the additional centripetal acceleration term in polar coordinates. The conversation emphasizes the importance of correctly accounting for time-varying coordinates in polar systems to derive accurate equations of motion. Understanding these differences enhances the appreciation of both mechanics approaches.
Adam Johnson
Messages
2
Reaction score
0
Missing homework template due to originally being posted in other forum.
I am trying to solve a problem using Newtonian Mechanics. I was able to solve it using Lagrangian Mechanics, and got the correct answer from the textbook, but when I use Newtonian I get the wrong answer. I want to be able to do it both ways in order to understand/appreciate the difference between Newtonian and Lagrangian.

The problem
A particle of mass m rests on a smooth plane. The plane is raised to an inclination angle θ at a constant rate α (θ=0 at t=0), causing the particle to move down the plane. Determine the motion of the particle.

My attempt at a solution
If we designate the starting position of the particle to be r0 (distance from the axis around which the plane rises), and r(t) to be the distance traveled by the particle down the ramp at a given time t, then r(t)=∫r'(t)dt from 0→t, where r'(t)=∫r''(t)dt from 0→t.
Now r''(t) is just the component of gravity directed down the ramp, so r''(t)=g*sin(αt).
∴ r'(t)=∫g*sin(αt)dt=g/α (1-cos(αt)). Then r(t)=∫r'(t)dt=g/α∫(1-cos(αt))dt=g/α (t - 1/α sin(αt))

If you do it using Lagrangian mechanics, you get r0(1-cosh(αt))-(g/2α^2)*(sin(αt)-sinh(αt)).

Any insight on logical errors I have made with my Newtonian approach would be greatly appreciated. Thanks!
 
Physics news on Phys.org
The equation of motion in polar coordinates in the radial direction is ##F_r = m \ddot{r} -mr\dot{\theta}^2.##
 
Last edited:
Dazed&Confused said:
The equation of motion in polar coordinates in the radial direction is ##F_r = m \ddot{r} -mr\dot{\theta}^2.##
Hi Dazed&Confused, thank you for your reply. Can you explain to me how you came up with that and why my assumption was incorrect? I thought F_r was just the component of gravity directed down the plane at a given time, so mg*sin(αt)
 
Adam Johnson said:
Hi Dazed&Confused, thank you for your reply. Can you explain to me how you came up with that and why my assumption was incorrect? I thought F_r was just the component of gravity directed down the plane at a given time, so mg*sin(αt)
Your assumption was that ar=r'' which is not true. As Dazed&Confused pointed out, there is another term in the radial acceleration (what people call centripetal acceleration).

In cartesian coordinates, the unit vectors are constant in time, so you can just differentiate twice to get ax=x''
But with polar coordinates, you are using coordinates which vary in time (if θ varies in time) and so you get additional terms.

If you look up 'acceleration in polar coordinates' then I'm sure there are many derivations of the full acceleration formula.
(Or you can find it yourself, but first you have to figure out ##\frac{d}{dt}\hat r## and ##\frac{d}{dt}\hat \theta## which are not zero unless dθ/dt is zero)
 
You can also derive this formula with the Lagrangian approach. With the Lagrangian $$\frac12m(\dot{r}^2 + r^2\alpha^2) -mgr\sin\alpha t$$ you will find the same formula with ##F_r = -mg\sin\alpha t.##
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .

Similar threads

Replies
2
Views
2K
Replies
7
Views
2K
Replies
3
Views
2K
Replies
8
Views
2K
Replies
18
Views
5K
Replies
45
Views
4K
Replies
38
Views
2K
Replies
4
Views
3K
Back
Top