Poteintial difference to move mass

  • Thread starter Thread starter indigojoker
  • Start date Start date
  • Tags Tags
    Difference Mass
AI Thread Summary
The discussion revolves around calculating the potential difference required to tilt two parallel plates at a 20-degree angle with a charged sphere suspended between them. The initial approach involves using the force balance equation F=QE=mg sin θ, leading to an expression for electric field E. The potential difference V is derived from integrating the electric field across the distance L between the plates. Clarifications indicate that the minus sign in the potential difference is not significant, and a free body diagram is suggested to better understand the forces acting on the sphere. Ultimately, the correct formula for potential difference is V = mgL tan(20)/q.
indigojoker
Messages
240
Reaction score
0
There's a small sphere of mass m that hangs by a thread. the sphere is between two parallel plates L apart. The sphere has a charge Q. What is the potential difference that will make the plates to assume an angel of 20 degrees with the vertical?

F=QE=mg \sin \theta
E=\frac{mg \sin 20}{Q}
V= - \int _0 ^L \frac{mg \sin 20}{Q}dx
V= - \frac{mgL \sin 20}{Q}d

i feel like this question should involve more work. was my thought process correct?
 
Physics news on Phys.org
Yes, it's correct. (But the d in your last line is presumably a typo.) Also, since the question asks for "potential difference", the minus sign is not really relevant.
 
yes it's a typo

could you explain why the potential difference is not relevant?
 
indigojoker said:
There's a small sphere of mass m that hangs by a thread. the sphere is between two parallel plates L apart. The sphere has a charge Q. What is the potential difference that will make the plates to assume an angel of 20 degrees with the vertical?

F=QE=mg \sin \theta
E=\frac{mg \sin 20}{Q}
V= - \int _0 ^L \frac{mg \sin 20}{Q}dx
V= - \frac{mgL \sin 20}{Q}d

i feel like this question should involve more work. was my thought process correct?

How do you get the first statement? Do a free body diagram of the forces on the suspended mass. There is the tension in the string, gravity and the electric force. From a free body vector diagram you should be able to get the expression for E and then V (=E/L) .

AM
 
If you do the free body diagram you will see that the gravitational and electric forces have to be balanced by the tension in the string.

\vec{T} = q\vec{E} + m\vec{g}

This means that:

T\sin{20} = qE
T\cos{20} = mg

Dividing:

qE/mg = \tan{20}

EL = V, so

V = mgL \tan{20}/q

AM
 
Last edited:
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top