Simple pendulum Help. Dunno Why Im wrong.

AI Thread Summary
The discussion revolves around a physics problem involving a pendulum system consisting of a light rigid rod and a meter stick. The user initially calculates the period of the pendulum using the formula for a simple pendulum but realizes that the system is actually a physical pendulum, not a simple one. Another participant points out the need to consider the moment of inertia of the meter stick in the calculations. The conversation emphasizes the importance of correctly identifying the type of pendulum to apply the right equations. Understanding the distinction between simple and physical pendulums is crucial for solving the problem accurately.
e=mcahhhh
Messages
3
Reaction score
0

Homework Statement



A very light rigid rod with a length of 0.742 m extends straight out from one end of a meter stick. The combination is suspended from a pivot at the upper end of the rod as shown in the following figure. The combination is then pulled out by a small angle and released.

Homework Equations


Period T=2pi sqrt(L/g)

The Attempt at a Solution



T=2pi* sqrt (.743/9.8)=1.72s

http://www.webassign.net/serpse8/15-p-034-alt.gif
 
Last edited:
Physics news on Phys.org
It is not a simple pendulum, I am afraid. A picture would be useful. You did not take the meter stick into account.

ehild
 
Oh i see its a physical pendulum
 
Yes. Find the moment of inertia.

ehild
 

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »

Thread 'Rolling without slipping on a curved surface'

Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
View full post »

Similar threads

Simple Harmonic motion of a Pendulum
Replies
1
Views
1K
Why Does T^2 Not Directly Correspond to L in Compound Pendulums?
Replies
2
Views
2K
Simple Harmonic Motion - Determine the period of oscillation
Replies
6
Views
3K
Period of a physical pendulum with a pivot at its center
Replies
3
Views
3K
Elastic Spring / Simple Pendulum Lowest Point
Replies
14
Views
2K
What is the period of a compound pendulum?
Replies
31
Views
7K
Simple Harmonic Motion Pendulum
Replies
2
Views
10K
Cube-Rod Pendulum: Solving Homework Statement & Equations
Replies
15
Views
3K
Period and Tension of a Pendulum
Replies
11
Views
4K
Length of Pendulum with Variables Only
Replies
1
Views
4K

Hot Threads

Recent Insights

Back
Top