Specific Heat Problem and boiling water

AI Thread Summary
The discussion revolves around a specific heat problem involving boiling water and an aluminum pan. The user sets up the equation Q=mcΔT to calculate the final temperature after mixing 140 grams of boiling water at 100°C with an aluminum pan at 24°C. The calculations lead to a final temperature of approximately 52.319°C. Clarification is provided that this value represents the final temperature, not the temperature change. The conversation confirms the accuracy of the calculations and understanding of the concept.
clutch12
Messages
21
Reaction score
0

Homework Statement


140 grams of boiling water (temperature 100° C, heat capacity 4.2 J/gram/K) are poured into an aluminum pan whose mass is 1100 grams and initial temperature 24° C (the heat capacity of aluminum is 0.9 J/gram/K).
After a short time, what is the temperature of the water?


Homework Equations


Q=mc delta t


The Attempt at a Solution



140g(4.2J/K/gram)(T-100) = 1100g(0.9 J/K/gram)(24-T)
588T-58800 = 23760 - 990 T
588T + 990 T = 23760 + 58800
1578 T = 82560
T= 52.319

Am I doing this right?
 
Physics news on Phys.org
Looks good to me, clutch.
 
Alright and when I am determining the temperature am i subtracting 100-52.319 or no?
 
No, 52.319 is the final answer. 100-52.319 would be the change in temperature of the water.
 
oh ok thanks for clearing that up
 
Thread 'Voltmeter readings for this circuit with switches'

Thread 'Voltmeter readings for this circuit with switches'

TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
View full post »
Thread 'Trying to understand the logic behind adding vectors with an angle between them'

Thread 'Trying to understand the logic behind adding vectors with an angle between them'

My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
View full post »

Similar threads

Do you need to account for the water heating up to the boiling point?
Replies
23
Views
2K
Calorimetry Lab Analysis (predict specific heat of unknown metal)
2
Replies
54
Views
9K
I try to solve a thermodynamics problem on heat transfer
Replies
3
Views
2K
Why don't units have match for specific heat and mass
Replies
21
Views
2K
Finding Specific Heat of Unknown Metal
Replies
3
Views
4K
Change in Entropy When Mixing Water at Different Temperatures
Replies
5
Views
1K
What is the specific heat of boiling water converting into steam?
Replies
7
Views
7K
Specific Heat Question: Calculating Temperature Change with Copper and Water
Replies
2
Views
1K
Heating water in a kettle (time, boil out time, work done)
Replies
18
Views
3K
How much ice to cool down this water?
Replies
17
Views
5K

Hot Threads

Recent Insights

Back
Top