How Do Thevenin's and Norton's Theorems Simplify Circuit Analysis?

  • Thread starter Thread starter rgarforth
  • Start date Start date
  • Tags Tags
    Theorem
AI Thread Summary
The discussion focuses on the application of Thevenin's and Norton's theorems in simplifying circuit analysis for homework problems. Thevenin's theorem is used to find the equivalent circuit between two points, making it easier to analyze load characteristics when changing load resistance. Norton’s theorem provides a current source equivalent, which simplifies the calculation of current through the load. Participants emphasize the importance of using diagrams to illustrate these concepts clearly. Understanding these theorems is crucial for effective circuit analysis.
rgarforth
Messages
1
Reaction score
0
Hi all, Hope everyone is fine and dandy!

I am having real problems with my homework, it is based on thevenins and nortons theorem. please see the attached word document for the questions.
I understand on the first question that the circuit is divided into two before calculating the voltage and resitances. please can you provide explanations with diagrams on how this is done.

Any Help much appreciated! Thankyou!
 

Attachments

  • 1.doc
    1.doc
    38.5 KB · Views: 379
Physics news on Phys.org
What is your question?

For the first problem you would find the thevenin equivalent between A and B, so that when you change the load resistance the characteristics of the load will be easier to calculate.

For the second problem you merely use the norton equivalent so that you have a current source, and can calculate the current through the load easily.
 
Thread 'Variable mass system : water sprayed into a moving container'

Thread 'Variable mass system : water sprayed into a moving container'

Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
View full post »

Thread 'Struggle to understand the concept of the question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »

Similar threads

Engineering How do I find Vth with the node voltage method?
Replies
10
Views
3K
Finding the Norton Equivalent Circuit in a Short Circuited Circuit
Replies
1
Views
2K
Engineering Norton's Theorem -- Help checking my work please
Replies
18
Views
3K
Engineering Norton/Thevenin Equivalent circuits with a dependent voltage source
Replies
9
Views
5K
Thevenin's Theorem, Superposition & Norton's Theorem
Replies
28
Views
7K
How Do You Find Thevenin and Norton Equivalents?
Replies
9
Views
2K
Thevenin's and Norton's Theorem
Replies
3
Views
2K
Why do real circuits look different compared to circuits people study
Replies
8
Views
2K
Engineering How Do You Approach Nortons and Thevenins Equivalent Circuits?
Replies
5
Views
2K
How to selfstudy to learn (electronics) network analysis (Thevenin, Norton)?
Replies
2
Views
1K

Hot Threads

Recent Insights

Back
Top