What forces are acting on the ant as it swings on a rotating rod?

  • Thread starter Thread starter Wen
  • Start date Start date
  • Tags Tags
    Motion
AI Thread Summary
The discussion centers on the forces acting on an ant clinging to a rod that rotates vertically. When the rod is released from a horizontal position, the ant experiences both gravitational force and friction as it swings to the lowest point. At the equilibrium position, the net force in the horizontal direction is zero, indicating that only friction and the ant's weight are acting on it. The ant also has a vertical acceleration due to its circular motion, necessitating consideration of forces in both x and y directions. Understanding these dynamics is crucial for calculating the contact force exerted by the rod on the ant.
Wen
Messages
44
Reaction score
0
a thin rod is fixed on one end and rotate in a vertical motion. Its period of oscillation is pi s .
It is now held in the horizontal position and let go. An ant happen to cling into the rod at distance 1 m from the pivot. Find the contact forcce the rod exert on the ants when it swing to the lowest position. Express the mag. of the force in terms of the ant's body weight.

When it reaches the equilibrium position, the aceleration is 0. hence the net force acting on ant in the horizontal direction should be 0. Only friction and the weight of the ant act on it . Is this way of doing correct , if not , please explain to me how?
 
Physics news on Phys.org
Wen,
two questions before I try to answer your question.
1. Is the rod rotating like the spoke of a bicycle wheel while the wheel is held upright?
2. Have you done simple harmonic motion?
 
yes to both .
 
What forces are the ant experiencing at the bottom and in which directions are they?
 
the friction and its weight because the aceleration of both the rod and ant is 0
 
Forget about the rod, just think about the ant. The projected motion of the ant on the x-axis gives a zero acceleration for the ant in the x-direction, but we also need to consider the projection of the ant on the y-axis in order to describe it's motion fully, that is it also has an acceleration in the y-direction as it revolves around the pivot. In what direction will the friction force (called the contact force in your problem) be?
 
Last edited:
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top