What is the average force exerted by the water on the wall when it rebounds?

AI Thread Summary
The discussion centers on calculating the average force exerted by a stream of water from a firefighter's hose when it hits a vertical wall. The water has a mass flow rate of 16.9 kg/s and an initial speed of 45.5 m/s, with the velocity vector directed 25 degrees below the horizontal. Participants express confusion about how to incorporate the angle and find the final velocity after the water rebounds, as well as how to relate average force to the change in momentum over time. The average force can be determined using the change in momentum divided by the time interval, but the challenge lies in deriving the necessary components from the given information. Clarification on these calculations is sought to proceed with the problem-solving process.
longball4153
Messages
4
Reaction score
0

Homework Statement


A horizontal stream of water from a fire-fighter's hose hits a vertical wall. The firefighter knows that 16.9 kg of water are emitted from the hose per second, and that the water has a speed of 45.5 m/s. At the instant when it hits the wall, the direction of the velocity vector of the water is 25.0 degrees BELOW the horizontal. Calculate the average force exerted by the water on the wall, assuming that the vertical component of the velocity vector of the water is unchanged but the horizontal component of the velocity vector is reversed when the water rebounds from the wall.

Vi=45.5 m/s
m= 16.9 kg/s
ϴ= 25 Degrees BELOW the horizontal


Homework Equations


P=mv
v2=vo2+2ax


The Attempt at a Solution



Po=mvo
po=16.9kg/s*45.5m/s
Po=768.95

Now I have the initial momentum. From here I am stuck and not sure where to go next. I know I need to somehow incorporate the angle given and calculate a final velocity. But then how would I take that and find an average force? Hopefully someone can explain/ show me the set up from here. Thanks!
 
Physics news on Phys.org
An average force is defined as the sum of the forces applied divided by the period of time. For example, if you have force a for 1 second and force b for 2 seconds, then the average force is:

\frac{1s*F_a + 2s*F_b}{3s} where s is seconds.

Does that help?
 
I understand that, however, how do I relate that to this particular problem?
 
I am doing this exact problem right now. I have found the momentum of the water and the x component of the velocity. Average force is the change in momentum/change in time, but how can you find time using the information in the problem?
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top