What is the Frictional Force on the Wooden Crate?

AI Thread Summary
To determine the frictional force on the wooden crate being dragged by a 120 N force at a 30° angle, the coefficient of kinetic friction is 0.1. The vertical force exerted by the crate is reduced due to the angle of the applied force, which affects the normal force. Calculating the resulting vertical force is crucial, as it influences the frictional force using the formula f = μN. The discussion highlights the importance of understanding the coefficient of friction and its implications on the crate's motion. Ultimately, if the horizontal component of the applied force exceeds the frictional force, the crate will accelerate.
Saged
Messages
3
Reaction score
0

Homework Statement


An older gentleman drags a wooden crate (m = 10 kg) containing his childhood toys out of storage. The 120 N force F that he applies on the crate makes an angle of 30° with the horizontal. The coefficient of kinetic friction μk between the well-polished floor and wooden crate is experimentally determined to be 0.1. What is the frictional force f on the crate? (cos 30° = .866, sin 30° = .5)

Homework Equations



F=ma
mgsin(θ)
f = μN
W=mg


The Attempt at a Solution



I have the solution in front of me, however, it's killing me that I can't solve it.

Any assistance would be fantastic.
 
Physics news on Phys.org
1. Identify all forces..
2. Since no acceleration, no change in uniform motion, net force must be equal to zero.
3. Draw free-body diagram.
 
I don't think it's safe to assume no acceleration and I don't think you need to.

First off look up the definition of coefficient of friction. Hint: It's a ratio.

As he is pulling up at an angle he is reducing the vertical force between box and floor caused by the weight of the box. Calculate the resulting vertical force. The rest should be easy. If not then look at the definition of coefficient of friction again.
 
Then for personal interest you could check if the frictional force is more or less than the horizontal component of the force the man is applying. If less then the box is accelerating.
 
PS: the title says "Inclined Plane Dilemma" but the problem does not appear to mention an inclined plane.
 
I was able to figure it out after hours of studying.

Thanks everyone!
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top