What is the Frictional Force on the Wooden Crate?

AI Thread Summary
To determine the frictional force on the wooden crate being dragged by a 120 N force at a 30° angle, the coefficient of kinetic friction is 0.1. The vertical force exerted by the crate is reduced due to the angle of the applied force, which affects the normal force. Calculating the resulting vertical force is crucial, as it influences the frictional force using the formula f = μN. The discussion highlights the importance of understanding the coefficient of friction and its implications on the crate's motion. Ultimately, if the horizontal component of the applied force exceeds the frictional force, the crate will accelerate.
Saged
Messages
3
Reaction score
0

Homework Statement


An older gentleman drags a wooden crate (m = 10 kg) containing his childhood toys out of storage. The 120 N force F that he applies on the crate makes an angle of 30° with the horizontal. The coefficient of kinetic friction μk between the well-polished floor and wooden crate is experimentally determined to be 0.1. What is the frictional force f on the crate? (cos 30° = .866, sin 30° = .5)

Homework Equations



F=ma
mgsin(θ)
f = μN
W=mg


The Attempt at a Solution



I have the solution in front of me, however, it's killing me that I can't solve it.

Any assistance would be fantastic.
 
Physics news on Phys.org
1. Identify all forces..
2. Since no acceleration, no change in uniform motion, net force must be equal to zero.
3. Draw free-body diagram.
 
I don't think it's safe to assume no acceleration and I don't think you need to.

First off look up the definition of coefficient of friction. Hint: It's a ratio.

As he is pulling up at an angle he is reducing the vertical force between box and floor caused by the weight of the box. Calculate the resulting vertical force. The rest should be easy. If not then look at the definition of coefficient of friction again.
 
Then for personal interest you could check if the frictional force is more or less than the horizontal component of the force the man is applying. If less then the box is accelerating.
 
PS: the title says "Inclined Plane Dilemma" but the problem does not appear to mention an inclined plane.
 
I was able to figure it out after hours of studying.

Thanks everyone!
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top