What is the percentage uncertainty in V when L1-L2 is 30?

AI Thread Summary
The discussion revolves around calculating the percentage uncertainty in the variable V, defined as V = (1/(L1-L2))^0.5, given that L1-L2 equals 30 with uncertainties of +/- 0.1 for both lengths. The method involves adding the uncertainties to get +/- 0.2, then calculating the percentage uncertainty as (0.2/30) * 100%, and adjusting for the square root by multiplying by 0.5. Participants confirm that this approach is correct, although one raises a question about the representation of the difference as 30.0 due to the uncertainty. Overall, the calculations and reasoning presented are validated, with some discussion on the notation of the final value.
Rohan1997
Messages
27
Reaction score
0

Homework Statement


My homework question says: the uncertainty in length 1 is +/- 0.1 and in length 2 is +/- 0.1 : calculate the percentage uncertainty in V where V

L1-L2 is 30

Homework Equations



V= (1/(L1-L2))^0.5 where L is the length[/B]

The Attempt at a Solution



So what I did was add the two uncertainties to get +/- 0.2
I then worked out percentage uncertainty by doing 0.2/30 *100%

and then I multiplied my answer by 0.5 since it is being square rooted.

Is this correct or have I made a mistake somewhere in my method?
 
Physics news on Phys.org
If you have learned to add uncertainties linearly, then: yes (correct) and no (no mistake) :smile:
 
BvU said:
If you have learned to add uncertainties linearly, then: yes (correct) and no (no mistake) :smile:
thanks :)
 
Your welcome, but mind you: it's an opinion: there's no guarantee

And: If the uncertainty in L1 - L2 is 0.2, why isn't this difference written as 30.0 ?
 
BvU said:
Your welcome, but mind you: it's an opinion: there's no guarantee

And: If the uncertainty in L1 - L2 is 0.2, why isn't this difference written as 30.0 ?
don't know what your talking about sorry
 
Thread 'Collision of a bullet on a rod-string system: query'
In this question, I have a question. I am NOT trying to solve it, but it is just a conceptual question. Consider the point on the rod, which connects the string and the rod. My question: just before and after the collision, is ANGULAR momentum CONSERVED about this point? Lets call the point which connects the string and rod as P. Why am I asking this? : it is clear from the scenario that the point of concern, which connects the string and the rod, moves in a circular path due to the string...
Thread 'A cylinder connected to a hanged mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top