Why Is My Calculation of Current in This Circuit Incorrect?

qwerty2x
Messages
15
Reaction score
0

Homework Statement



http://img25.imageshack.us/img25/5953/elek.png


Homework Equations



v=IR

The Attempt at a Solution


I have tried finding the total resistance of the circuit and then applying ohms law. My answer is 0.65 Amps but that's incorrect.

Any help is much appreciated!
 
Last edited by a moderator:
Physics news on Phys.org
qwerty2x said:
I have tried finding the total resistance of the circuit and then applying ohms law. My answer is 0.65 Amps but that's incorrect.

Hi qwerty2x! :wink:

Show us your full calculations, and then we can see what went wrong, and we'll know how to help! :smile:
 
Use the equivalent resistance formulas and then Ohm's Law

For two resistors in series R_{eq} = R_{1} + R_{2}
For two resistors in parallel \frac{1}{R_{eq}} = \frac{1}{R_{1}} + \frac{1}{R_{2}}

or two resistors in parallel simplified R_{eq} = \frac{R_{1}R_{2}}{R_{1}+R_{2}}}

Hope this helps!
 
Hello everyone, I’m considering a point charge q that oscillates harmonically about the origin along the z-axis, e.g. $$z_{q}(t)= A\sin(wt)$$ In a strongly simplified / quasi-instantaneous approximation I ignore retardation and take the electric field at the position ##r=(x,y,z)## simply to be the “Coulomb field at the charge’s instantaneous position”: $$E(r,t)=\frac{q}{4\pi\varepsilon_{0}}\frac{r-r_{q}(t)}{||r-r_{q}(t)||^{3}}$$ with $$r_{q}(t)=(0,0,z_{q}(t))$$ (I’m aware this isn’t...
Hi, I had an exam and I completely messed up a problem. Especially one part which was necessary for the rest of the problem. Basically, I have a wormhole metric: $$(ds)^2 = -(dt)^2 + (dr)^2 + (r^2 + b^2)( (d\theta)^2 + sin^2 \theta (d\phi)^2 )$$ Where ##b=1## with an orbit only in the equatorial plane. We also know from the question that the orbit must satisfy this relationship: $$\varepsilon = \frac{1}{2} (\frac{dr}{d\tau})^2 + V_{eff}(r)$$ Ultimately, I was tasked to find the initial...
Back
Top