Academic First Law Of Thermodynamics Problem

AI Thread Summary
The discussion focuses on solving a problem related to the first law of thermodynamics, specifically in an open system context. The user is attempting to formulate a time-dependent differential equation but is encountering difficulties, particularly with the energy equation and the interpretation of terms. Key points include the clarification that "n" represents the number of moles, and the user is confused about the disappearance of the term involving internal energy when switching from moles to mass. The conversation emphasizes the need to understand the relationships between the variables and how they interact in the context of thermodynamic equations. The thread highlights the complexities of applying thermodynamic principles to specific scenarios.
Kolin101
Messages
4
Reaction score
0
Homework Statement
An insulated tank of volume 12 m3 and with a valve was filled with perfect triatomic gas at pressure 10 bar. Initially the valve was closed. A paddle wheel was mounted inside the tank and was run by 20 kW engine. The paddle wheel was turn on and at the same time the exit valve was opened. The gas temperature was constant trough the whole process (due to very slow flow) and equal to 300 K.
Calculate the time needed to decrease the pressure in the tank to 5 bar.
Relevant Equations
dU=dQ-dW-dmh
Hi there. I have a problem solving above problem. How can I move on with my solution? It seems to me that I have proper approach but I'm just stuck with the energy equation ;/

Part of solution below:

Exam Questions Test 1 - Strona 1.jpg
 
Physics news on Phys.org
This involves application of the open-system version of the 1st law of thermodynamics, and, for this particular problem, should be formulated as a time-dependent differential equation (rather than using finite differences): $$\frac{d(nu)}{dt}=-\dot{W}+h\frac{dn}{dt}=-\dot{W}+u\frac{dn}{dt}+RT\frac{dn}{dt}$$For constant temperature, this reduces to: $$0=-\dot{W}+V\frac{dP}{dt}$$
 
Thank You a lot, I've tried also this way but with no results. But to be sure, what for does the "n" stands for in your first equation?
 
Kolin101 said:
Thank You a lot, I've tried also this way but with no results. But to be sure, what for does the "n" stands for in your first equation?
Number of moles in tank at time t.
 
ok I've figured out how would it look like in "my style solution" but I still have some questions. Why does the $$ u\frac{dn}{dt} $$
term disappears? when i rewrote it using mass instead of moles, the term
$$\frac{dm}{dt}CvT$$ seems to have a non zero value (there is a mass flowing out, that caries out internal energy at T=300K) and unfortunately Cv is not known either ;/

(new solution attached below the quote)
Chestermiller said:
This involves application of the open-system version of the 1st law of thermodynamics, and, for this particular problem, should be formulated as a time-dependent differential equation (rather than using finite differences): $$\frac{d(nu)}{dt}=-\dot{W}+h\frac{dn}{dt}=-\dot{W}+u\frac{dn}{dt}+RT\frac{dn}{dt}$$For constant temperature, this reduces to: $$0=-\dot{W}+V\frac{dP}{dt}$$

tank discharge.jpg
 
Kolin101 said:
ok I've figured out how would it look like in "my style solution" but I still have some questions. Why does the $$ u\frac{dn}{dt} $$
term disappears?
It cancels from both sides of the equation. What is the derivative of un with respect to t? On the rhs, h=u+Pv.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top