Calculating Time on the Moon for a Pendulum Clock

AI Thread Summary
A pendulum clock that operates accurately on Earth will run slower on the Moon due to the reduced gravitational acceleration (g=1.63 m/s²). The period of the pendulum on the Moon is longer than on Earth, meaning it will take more time to complete each swing. Consequently, if the clock is synchronized at 12:00 AM on Earth and runs for 24 hours, it will show a time reading that is behind the Earth clock. The calculations demonstrate that the specific length of the pendulum does not affect the outcome, as it cancels out in the equations. Ultimately, the clock will indicate fewer hours passed on the Moon compared to the Earth clock after the same duration.
AdnamaLeigh
Messages
42
Reaction score
0
A certain pendulum clock that works perfectly on Earth is taken to the moon, where g=1.63m/s^2. The clock is started at 12:00:00AM and runs for one Earth day (24 hours). What will be the reading for the hours? Answer in units of h.

I'm stumped. I know that the period for the pendulum on Earth is equal to 2π√(L/9.8) and on the moon it is 2π√(L/1.63).
 
Physics news on Phys.org
This is a nice question. It gets to think about the situation and how the concepts apply. Here is something to get you started.
Would you expect the pendulum clock to run faster, slower or the same rate on the moon? (Hint: how do their periods compare?)
 
The period on the moon will be longer so the clock will run slower. The time will be behind compared to the clock on earth.
 
Suppose you choose the length of the pendulum so that its period on Earth is one second (or one minute, or one hour, whatever you want).


What would be its period on the moon? When the clock on Earth reads one hour after 12:00 how much it will read in the moon if they started synchonized at 12:00?
 
AdnamaLeigh said:
The period on the moon will be longer so the clock will run slower. The time will be behind compared to the clock on earth.
Well the period is the time it takes for each swing (out and back). If you apply the idea like mathphys recommends; let the period on Earth = 1 sec, then using the formula you gave, solve for L
L/g (earth)(m/s^2) = 1 sec^2
L = g(earth)(m/s^2) x 1 sec^2
L = 9.8 m
You know that L is the same on moon, so calculate its corresponding period.. T(moon) = ? You are correct it is longer than T(earth).

Using the same L we chose above, in 24hrs how many periods will occur?
24hrs / T(earth) =?

In 24 Earth hours how many moon hours will pass?
24 hrs/ T(earth) = A / T(moon) [equation (i)]
(don't forget to keep your units consistent,e.g. if T is in seconds, need to
convert 24 hours to seconds before dividing)

Now, just solve for A, the time passed on the moon.
(if you changed units to seconds, don't forget to change them back to hours for your final answer).

As a double check of your math, instead of having T(earth) = 1sec, choose 1 minute (60sec). Solve for L as above. Plug L into equation for a period on the moon, an so on as we just did above...If you did your math correctly (and kept your units consistent), you will come out with the same number of hours for time on the moon. (I did)..

If you get stuck.. just show us what you tried and we'll get you through it..

{Hint: if you take equation (i) and solve for A directly
A = [T(moon)/T(earth)] x 24hrs , and substitute the formula you have, for the period of each.. You should see that L cancels out (meaning L does not matter). Again (keeping your units consistent), you will come out to the same number of hours passed on the moon as the two cases above. }
 
Last edited:
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top