Calorimetry: Thermal energy going into translational KE

AI Thread Summary
The discussion revolves around a physics problem involving calorimetry and the conversion of thermal energy into translational kinetic energy (KE). The user calculates the thermal energy released when a cup of boiling water cools from 100°C to 25°C, resulting in a value of -78487.5 J after converting calories to joules. They then adjust their calculations based on the degrees of freedom, concluding that the effective energy is 39243.75 J. Using the kinetic energy formula, they derive a final velocity of 560 m/s for the cup if the thermal energy is converted entirely into translational KE. The user seeks confirmation of their calculations and results.
lolcat
Messages
15
Reaction score
0

Homework Statement



Suppose a cup of boiling water (m=250g) instantaneously cools to room temperature (25°C) with the liberated thermal energy going into translational KE. How fast will the cup fly off the table? Assume the water molecules have 18 degrees of freedom.

Homework Equations



Q=mcΔT
Uwater=9nRT (not sure about this one)


The Attempt at a Solution



So what I first did was try to calculate Q:

Q=mcΔT
Q=(250g)(1)(25-100)
Q=-18750 cal

I then converted calories to joules:

-18750 cal x 4.186 J = -78487.5 J.

I am not sure where to go after this. Any help?
 
Physics news on Phys.org
Update:

I'm guessing that since the cup is on a horizontal table, the degrees of freedom is 9. Therefore the energy must be halved.

Q = 39243.75 J

Plug it into:

KE = (1/2)mv2

v2 = (2KE) / m
= (2*39243.75) / .250
= 313950

√v2 = √313950
v = 560 m/s

Can anyone confirm that this is correct?
 
Any help?
 
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top