Voltmeter Placement in Combined Circuit Problem

  • Thread starter Thread starter paperdoll
  • Start date Start date
  • Tags Tags
    Circuit
AI Thread Summary
The discussion centers on the correct placement of a voltmeter in a combined circuit problem. The user has calculated the resistance and current but is unsure how to determine the voltage across the voltmeter when it is not placed in parallel with a single resistor. It is noted that the voltmeter measures the voltage difference between two points, specifically the right side of the 4-ohm resistor and the right side of the 1-ohm resistor. Additionally, the orientation of the voltmeter probes affects whether the reading is positive or negative. Understanding these placements and orientations is crucial for accurate voltage measurement in the circuit.
paperdoll
Messages
69
Reaction score
0

Homework Statement


I am having trouble with the placement of the voltmeter in this particular problem


Homework Equations


What is the reading on the voltmeter V?

Image in link below:
http://imageshack.us/photo/my-images/52/photouko.jpg/"

The Attempt at a Solution


I found that the resistance of R is 8 ohms and the current flowing through it is 7.5 A. But I don't know how to find the voltage when the voltmeter is placed in that way :confused: I have only done voltage when the voltmeter is placed in parallel with a singular resistor only.
 
Last edited by a moderator:
Physics news on Phys.org
The voltage at the left side of the 4 ohm resistor is 100.0V, relative to Y. What is the voltage at the right side of the 4.0-ohm resistor, relative to Y? This will be the voltage appearing at the "+" terminal of your voltmeter.

The voltage at the left side of the 1 ohm resistor is also 100.0V relative to Y. What is the voltage at the right side of the 1.0 ohm resistor, relative to Y? This will be the voltage appearing at the "-" terminal of your voltmeter.

Now your voltmeter is measuring the difference of these 2 voltages (V4-ohms, right side - V1-ohms, right side)
 
lewando said:
The voltage at the left side of the 4 ohm resistor is 100.0V, relative to Y. What is the voltage at the right side of the 4.0-ohm resistor, relative to Y? This will be the voltage appearing at the "+" terminal of your voltmeter.

The voltage at the left side of the 1 ohm resistor is also 100.0V relative to Y. What is the voltage at the right side of the 1.0 ohm resistor, relative to Y? This will be the voltage appearing at the "-" terminal of your voltmeter.

Now your voltmeter is measuring the difference of these 2 voltages (V4-ohms, right side - V1-ohms, right side)

Well said, except that there is no indication as to which terminal of the voltmeter is positive and which is negative. Therefore, the answer may be either positive or negative, depending on the orientation of the voltmeter (how the probes are connected).
 
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top