Electric field intensity/ charge magnitude question

AI Thread Summary
Two equal but oppositely charged points are 1.0 m apart, creating an electric field intensity of 2.4x10^5 N/C at the midpoint. The electric field equation used is E = Kc(q/r^2), with Kc being 8.99x10^9. To find the charge magnitude, it's essential to consider the contributions from both charges at the midpoint, which is 0.5 m from each charge. The correct approach involves summing the electric fields from both charges, as they are vector quantities. The final calculation reveals that each charge has a magnitude of approximately 6.67x10^-6 C.
AladdinSane
Messages
8
Reaction score
0

Homework Statement


Two equal but oppositely charged points are 1.0 m apart in a vacuum. The electric field intensity at the midpoint between the charges is 2.4x10^5 N/C. What is the magnitude of each charge?


Homework Equations


Electric force= Kc (q/r^2)
Kc=8.99x10^9


The Attempt at a Solution


Hi guys, first off, thanks for any help given.
My problem is that I am unsure as to how to incorporate both missing charges into the equation.
I tried solving the equation simply by putting in what is given.

2.4 x 10^5 = 8.99x10^9(q/1^2)
2.4x10^5=8.99x10^9 x q
q= .000027

Thus, I only found one charge, and I don't even believe that is right.. Could someone help explain what I am to do? Thanks for the help!
 
Physics news on Phys.org
You have to consider the sum of the electric field from each charge at the midpoint. Also, be careful with your distances. The distance from each charge to the point between them is 0.5 meter, not 1 meter.
 
thanks, hage, but I'm still confused how the two charges are linked, how they fit together to create that 2.4 x 10^5 charge at their midpoint. i tried the problem again, solving it as so...
EF = Kc (q/r^2)
2.4 x 10^5 = 8.99x10^9 q/.25
60000= 8.99x 10^9
q = 6.67x10^-6
q= -6.67x10^-6

i feel like this is still incorrect... thanks again for the future help.
 
You must add up the electric field from the postive charge with the electric field from the negative charge at the midpoint. Remember, E is a vector quantity. The sum of the two gives 2.4x10^5 N/C at the midpoint. So the idea is E = E1 + E2.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top